Preparation of SmBCO layer for the surface optimization of GdYBCO film by MOCVD process based on a simple self-heating technology

摘要

The MOCVD process was adopted to grow the REBa2Cu3O7-delta ((REBCO), RE=rare earth elements) films on the LaMnO3 (LMO) templates. Meanwhile, the LMO-template tapes are heated by the joule effect after applying a heating current through the Hastelloy metal substrates. The surface of GdYBCO films prepared by MOCVD method is prone to form outgrowths. So the surface morphology of GdYBCO film is optimized by depositing the SmBCO layer, which is an important process method for the preparation of high-quality multilayer REBCO films. At last, the GdYBCO/SmBCO/GdYBCO multilayer films were successfully prepared on the LMO templates based on the simple self-heating method. It is demonstrated that the GdYBCO surface was well improved by the characterization analysis of scanning electron microscope. And the Delta omega of REBCO (005) and Delta phi of REBCO (103), which were performed by an X-ray diffraction system, are respectively 1.3 degrees and 3.3 degrees What's more, the critical current density (J(c)) has been more than 3 MA/cm(2) (77 K, 0 T) and the critical current (I-c) basically shows a trend of good linear increase with the increase of the number of REBCO layers. (C) 2017 Elsevier B.V. All rights reserved.