首页> 外文会议>Symposium on defect and impurity engineered semiconductors >Control of the Sb redistribution in strained SiGe layers using point-defect injection
【24h】

Control of the Sb redistribution in strained SiGe layers using point-defect injection

机译:使用点缺陷注射控制紧张SiGe层中的SB再分配

获取原文

摘要

Sb diffusion in strained Si_(1-x)Ge_x (x=0.1 and 0.2) layers during nitridation (in NH_3, 810 deg) and oxidation (in dry O_2, 825 and 900 deg) of Si/Si_(1-x)Ge_x/Si heterostructures is measured and, subsequently, compared with that obtained for treatments in vacuum. An enhancement (V) or retardation (#eta#) of Sb diffusion in strained Si_(1-x)Ge_x after nitridation/oxidation anneals is detected. For example, 810 (NH_3) and 900 deg (O_2) anneals results in v approx 2 and #eta# approx 0.15 in strained Si_(0.9)Ge_(0.1), respectively. The retardation of Sb diffusion is attibuted to the injection of excess self-interstitials (I) and strongly indicating low interstitialcy fraction of Sb diffusion in strained Si_(1-x)Ge_x. The enhancement of Sb diffusion may be due to direct injection of vacancies (V), but only if the V diffusivities are significantly different in Si and Si_(1-x)Ge_x, or depletion of I in the strained Si_(1-x)Ge_x layers caused by the excess V concentration at the top surface of silicon layer.
机译:在氮化(在NH_3,810℃)和氧化期间,Si / Si_(1-x)ge_x的氧化(在NH_3,810℃)和氧化(在干燥O_2,825和900°)中的应变Si_(1-x)Ge_x(x = 0.1和0.2)层中的Sb扩散。 / Si异质结构被测量,随后与真空处理的处理相比。检测到氮化/氧化退火后应变Si_(1-x)Ge_x中的Sb扩散的增强(V)或延迟(#ETA#)。例如,810(NH_3)和900°(O_2)退火的退火将分别导致v约2和#eta#的应变Si_(0.9)Ge_(0.1)中的约0.15。 Sb扩散的延迟被定向于注射过量的自鼻间质(I)并强烈表示应变Si_(1-x)Ge_x中的Sb扩散的低间隙分数。 SB扩散的增强可能是由于直接注射空位(V),但仅当V扩散率在Si和Si_(1-x)Ge_x中显着不同,或者在应变Si_(1-x)中的耗尽时由硅层顶表面的多余V浓度引起的Ge_x层。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号