首页> 外文会议>Symposium on Ferrolectric Thin Films >Hetero-epitaxial Growth of (1, 0, m+1) One Axis-oriented Bismuth Layered Structured Ferroelectrics Thin Films Directly Crystallized by MOCVD
【24h】

Hetero-epitaxial Growth of (1, 0, m+1) One Axis-oriented Bismuth Layered Structured Ferroelectrics Thin Films Directly Crystallized by MOCVD

机译:(1,0,M + 1)的异外延生长一轴取向的铋层状结构化铁电解薄膜通过MOCVD直接结晶

获取原文

摘要

Bismuth layered structured ferroelectrics (BLSF) thin films with different number of octahedron number (m-number) were prepared by MOCVD and directly crystallized on the substrates. Directly crystallized SrBi_2Ta_2O_9 (SBT) (m=2) films on a (111) Pt/Ti/SiO_2/Si substrate were ascertained to have a strong (103) one-axis orientation by the X-ray reciprocal space mapping and to be hetero-epitaxially grown on the (111) Pt grains by the TEM observation. Moreover, directly crystallized Bi_2VO_(5.5) (m=1) and Bi_4Ti_3O_(12) (m=3) films deposited on the same substrate showed (102) and (104) one-axis preferred orientations, respectively. These orientations are basically the equal ones with SBT (103) orientation because the tilting angle of c-axis from the substrate surface is also about 55°. Therefore, the direct crystallization is one of the important key techniques for orientation control of BLSF films. Moreover, the directly crystallized SBT film deposited on a (111) Ir/TiO_x/SiO_2/Si substrate at 570 °C by ECR-MOCVD exhibited (103) one-axis orientation, which also originated from the local epitaxial growth on (111)-oriented Ir grains. The remanent polarization (2Pr), and the coercive field (Ec) of this film were 16.1 μC/cm~2 and 83 kV/cm at an applied electric field of 360kV/cm, respectively. This Pr value is about 88% of the expected value of (103)-oriented SBT film from both the Pr values of the (116) and (001)-oriented epitaxial films and detailed crystal analysis.
机译:铋层状结构的铁电体(BLSF)薄膜具有不同数目的八面体数(m个)通过MOCVD制备并直接结晶在基板上。直接结晶SrBi_2Ta_2O_9(SBT)(M = 2)上的薄膜(111)的Pt /钛/ SiO_2 / Si衬底被确定为具有较强的(103)的一轴通过X射线倒易空间映射取向并成为杂-epitaxially生长在(111)Pt粒子由TEM观察。此外,直接结晶Bi_2VO_(5.5)(M = 1),并存放于同一基板上Bi_4Ti_3O_(12)(M = 3)片显示(102)和(104)分别具有一个轴择优取向,。这些取向基本上都是相等的那些与SBT(103)取向,因为c轴的从基片表面的倾斜角度也约为55°。因此,直接结晶是用于BLSF膜的取向控制的重要的关键技术之一。此外,通过ECR-MOCVD沉积的(111)的Ir / TiO_x / SiO_2 / Si基板上,在570℃的直接结晶SBT薄膜具有(103)单轴取向,这也源自本地外延生长(111)取向铱粒。剩余极化(的2Pr),并且该膜的矫顽电场Ec为16.1μC/厘米〜2和83千伏/厘米在施加360kV /厘米的电场,分别。该PR值约88从(116)的两个镨值(103)取向的SBT薄膜和(001)的预期值的百分比取向外延膜和详细晶体分析。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号