首页> 外文会议>International Conference on Electronic Packaging Technology >Epitaxial growth of intermetallic compounds formed at eutectic Sn37Pb/polycrystalline Cu interface during solid-state aging
【24h】

Epitaxial growth of intermetallic compounds formed at eutectic Sn37Pb/polycrystalline Cu interface during solid-state aging

机译:在固态老化期间在共晶SN37PB /多晶Cu界面形成的金属间化合物的外延生长

获取原文

摘要

Epitaxial growth of intermetallic compounds formed at eutectic Sn37Pb/ polycrystalline Cu interface during solid-state aging. The results show that the interfacial Cu6Sn5 grains exhibit textured growth under solid-state condition and their preferred orientations are affected by the as-soldered joints. Cu6Sn5 grains with [0001] direction normal to the interface are stable in solid and molten Sn37Pb solder at 200 ºC, but will be rapidly consumed at 280 ºC, which leads to the formation of different textures in Cu6Sn5 layer during the solid-state aging treatment to the joints formed at 200 ºC and 280 ºC. Also, the effects of the texture evolution on the growth of interfacial IMCs are evaluated. The results show that Cu diffusion along [0001] direction of Cu6Sn5 is faster and therefore more interfacial IMCs are generated in the joints formed at 200 ºC than those formed at 280 ºC under the same solid-state reaction conditions.
机译:固态老化期间在共晶SN37PB /多晶Cu界面形成的金属间化合物的外延生长。结果表明,界面Cu6Sn5晶粒在固态条件下表现出纹理的生长,并且它们的优选取向受到焊接接头的影响。具有垂直于界面的方向的Cu6Sn5晶粒在200℃下的固体和熔融SN37PB焊料中稳定,但在280ºC下会迅速消耗,从而在固态老化处理期间导致Cu6Sn5层中的不同纹理形成在200ºC和280ºC中形成的关节。而且,评估纹理演化对界面IMC的生长的影响。结果表明,Cu扩散沿着Cu6SN5的方向更快,因此在与在相同的固态反应条件下形成的在200℃的接头中产生更多的界面IMC。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号