A Rotor-Mounted Digital Instrumentation System for Helicopter Blade Flight Research Measurements

摘要

A rotor-mounted flight instrumentation system developed by the NASA Langley Research Center for helicopter rotor blade research is described. The system utilizes high-speed digital techniques to acquire research data from miniature pressure transducers on advanced rotor airfoils which are flight tested on an AH-1G helicopter. The system employs microelectronic pulse code modulation (PCM) multiplexer-digitizer stations located remotely on the blade and in a hub-mounted metal canister. As many as 25 sensors can be remotely digitized by a 2.5-mm-thick electronics package mounted on the blade near the tip to reduce blade wiring. The electronics contained in the canister digitizes up to 16 sensors, formats these data with serial PCM data from the remote stations, and transmits the data from the canister which is above the plane of the rotor. Data are transmitted over an rf link to the ground for real-time monitoring and to the helicopter fuselage for tape recording. The complete system is powered by batteries located in the canister and requires no slip rings on the rotor shaft.