您现在的位置:首页 > 国际标准分类(ICS) >

造纸技术

4542条结果
< 1/ 20 >
  • 发布单位:

    中国-国家标准(CN-GB)

    标准状态:

    即将实施

    标准号:

    GB/T 44834-2024

    发布时间:

    2024-10-26

    中标分类:

    Y32 纸

    国标分类:

    85.060 纸和纸板

    实施时间:

    2025-05-01

    摘要: 本文件界定了术语和定义,规定了食品包装用水性涂布纸和纸板的要求、检验规则和标志、包装、运输、贮存,描述了相应的试验方法,并给出了有关分类的信息。
    本文件适用于食品包装用水性涂布纸和纸板的生产、检验和销售。
    获取标准
  • 2.[标准] 热敏纸

    发布单位:

    中国-国家标准(CN-GB)

    标准状态:

    即将实施

    标准号:

    GB/T 28210-2024

    发布时间:

    2024-03-15

    中标分类:

    Y32 纸

    国标分类:

    85.060 纸和纸板

    实施时间:

    2025-04-01

    摘要: 本文件规定了热敏纸的技术要求、检验规则、标志、包装、运输、贮存,描述了相应的试验方法,给出了有关分类的信息,界定了相应的术语和定义。本文件适用于通过热作用显色为黑色图文的各类热敏纸的生产、检验和销售。
    获取标准
  • 3.[标准] 格拉辛纸

    发布单位:

    中国-国家标准(CN-GB)

    标准状态:

    现行

    标准号:

    GB/T 29282-2024

    发布时间:

    2024-03-15

    中标分类:

    Y32 纸

    国标分类:

    85.060 纸和纸板

    实施时间:

    2024-10-01

    摘要: 本文件规定了格拉辛纸的要求、检验规则、标志、包装、运输、贮存,描述了相应的试验方法,给出了有关分类的信息。本文件适用于经超级压光,可直接涂硅油,且具有一定透明度、用于不干胶标签底纸的格拉辛纸的生产、检验和销售。
    获取标准
  • 发布单位:

    中国-国家标准(CN-GB)

    标准状态:

    即将实施

    标准号:

    GB/T 27728.1-2024

    发布时间:

    2024-09-29

    中标分类:

    Y39 其他纸

    国标分类:

    85.080 纸制品

    实施时间:

    2025-10-01

    摘要: 本文件规定了湿巾的通用要求、成人湿巾专用要求、宠物用湿巾专用要求、物体用湿巾专用要求以及检验规则、标识、包装、运输、贮存,界定了术语和定义,给出了产品分类,描述了相应的试验方法。
    本文件适用于日常生活所用的由
    注1:湿巾的要求包括通用要求和专用要求,成人湿巾、宠物用湿巾和物体用湿巾的专用要求见本文件,婴童湿巾、消毒湿巾的专用要求分别见GB/T 27728.2和GB/T 27728.3。
    注2:本文件中成人湿巾和物体用湿巾专用要求不适用于消毒湿巾。非织造布、无尘纸或其他原料制造的各种湿巾的生产、检验和销售。
    获取标准
  • 发布单位:

    中国-国家标准(CN-GB)

    标准状态:

    即将实施

    标准号:

    GB/T 27728.2-2024

    发布时间:

    2024-09-29

    中标分类:

    Y39 其他纸

    国标分类:

    85.080 纸制品

    实施时间:

    2025-10-01

    摘要: 本文件规定了婴童湿巾的要求、检验规则、标识、包装、运输、贮存,描述了相应的试验方法。
    本文件适用于日常生活所用的由非织造布、无尘纸或其他原料制造的各种供6岁及以下婴幼儿及儿童使用的湿巾的生产、检验和销售。
    获取标准
  • 发布单位:

    中国-国家标准(CN-GB)

    标准状态:

    即将实施

    标准号:

    GB/T 27728.3-2024

    发布时间:

    2024-09-29

    中标分类:

    Y39 其他纸

    国标分类:

    85.080 纸制品

    实施时间:

    2025-10-01

    摘要: 本文件规定了消毒湿巾的要求、检验规则及标识、包装、运输、贮存,界定了消毒湿巾相关的术语和定义,给出了产品分类,描述了相应的试验方法。
    本文件适用于日常生活所用的由非织造布、无尘纸或其他原料制造的各种消毒湿巾的生产、检验和销售。
    本文件不适用于医疗环境和医疗器械用消毒湿巾。
    获取标准
  • 发布单位:

    中国-国家标准(CN-GB)

    标准状态:

    即将实施

    标准号:

    GB/T 31104-2024

    发布时间:

    2024-10-26

    中标分类:

    Y91 造纸机械与设备

    国标分类:

    85.100 造纸工业设备

    实施时间:

    2025-05-01

    摘要: 本文件界定了相关的术语和定义、符号,
    规定了造纸机械用钢制烘缸(以下简称钢制烘缸)的分类和结构、材料、设计、制造、验收、涂敷、标志、包装、运输及贮存,描述了相应的试验方法。
    本文件适用于造纸机械传热用、内部工作介质为水蒸气的钢制烘缸。本文件也适用于其他行业的类似工况,如食品干燥、印染纺织烘干、皮革加工、木材加工等。
    获取标准
  • 发布单位:

    中国-国家标准(CN-GB)

    标准状态:

    即将实施

    标准号:

    GB/T 44833-2024

    发布时间:

    2024-10-26

    中标分类:

    Y33 纸制品

    国标分类:

    85.080 纸和纸板

    85.060 纸制品

    实施时间:

    2025-05-01

    摘要: 本文件界定了纸吸管(含吸管原纸)的术语和定义,规定了纸吸管的要求、检验规则及标志、包装、运输、贮存,描述了相应的试验方法,并给出了有关分类的信息。
    本文件适用于专供吸饮流质食品、一次性使用的纸吸管和生产纸吸管用的吸管原纸的生产、检验和销售。
    获取标准
  • 发布单位:

    中国-团体标准(CN-TUANTI)

    标准状态:

    未生效

    标准号:

    T/ZJZZXH 1-2024

    发布时间:

    2024-03-05

    中标分类:

    Z05 环境保护 - 环境保护综合 - 污染控制技术规范

    国标分类:

    85.060 造纸技术 - 纸和纸板

    实施时间:

    2024-04-05

    摘要: 主要技术内容:本文件规定了纸类产品碳足迹核算原则、核算范围、数据、分配、核算方法和核算报告,界定了相关的术语和定义。本文件适用于纸及纸板的产品
  • 发布单位:

    中国-团体标准(CN-TUANTI)

    标准状态:

    现行

    标准号:

    T/ZGZS 0405-2024

    发布时间:

    2024-03-08

    中标分类:

    Y04 轻工、文化与生活用品 - 轻工、文化与生活用品综合 - 基础标准与通用方法

    国标分类:

    85.020 造纸技术 - 纸生产工艺

    实施时间:

    2024-03-08

    摘要: 主要技术内容:范围;规范性引用文件;术语与定义;评价原则;评价目标与内容;评价方法;数据;碳足迹计算程序;结果通报
  • 11.[标准] 湿厕纸

    发布单位:

    中国-团体标准(CN-TUANTI)

    标准状态:

    现行

    标准号:

    T/HBMHS 0003-2024

    发布时间:

    2024-01-20

    中标分类:

    Y 轻工、文化与生活用品

    国标分类:

    85.080 造纸技术 - 纸制品

    实施时间:

    2024-02-20

    摘要: 主要技术内容:本标准的技术要求包括:感官性状、尺寸、含液量、pH值、有效成分含量、 稳定性、包装密封性、微生物学指标、杀灭微生物指标、毒理安全性指标、内装量、可迁移性荧光增白剂、汞、铅、砷、镉、可冲散性测试
  • 动力传输结构中用作底板的锻造环和空心件的标准规范

    发布单位:

    美国-美国材料与试验协会(US-ASTM)

    标准状态:

    现行

    标准号:

    ASTM A1090/A1090M-19(2024)

    发布时间:

    2024-03-01

    中标分类:

    -

    国标分类:

    77.140.85 钢铁产品 - 钢铁锻件

    实施时间:
    摘要: 1.1This specification covers high-strength, low-alloy steel ring and hollow forgings intended primarily for use as base plates in welded tubular structures for power transmission applications. However, use of this specification is not restricted to such applications and it may be used in other applications for which the attributes of the materials, as defined by this specification, are appropriate.1.2The atmospheric corrosion resistance of Grades A, B, and C in most environments is substantially better than that of carbon structural steel with or without copper addition (seeNote 1). When exposed to the atmosphere, these grades are suitable for many applications in the bare (unpainted) condition.Note 1:See GuideG101for methods of estimating the atmospheric corrosion resistance of low-alloy steels.1.3The thickness of forgings is limited only by the capacity of the composition to meet the specified mechanical property requirements; however, current practice normally limits the thickness of forgings furnished under this specification to a range of 2 in. to 6 in. [51 mm to 152 mm].Note 2:When the steel is to be welded, a welding procedure suitable for the grade of steel and intended use or service should be used. See Appendix X3 of SpecificationA6/A6Mfor information on weldability.1.4The text of this specification contains notes, footnotes, or both, that provide explanatory material. Such notes and footnotes, excluding those in tables and figures, do not contain any mandatory requirements.1.5Supplementary requirements are available but shall apply only when specified by the purchaser at the time of ordering.1.6The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.8This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
  • 涡轮机转子盘和叶轮用真空处理合金钢锻件的标准规范

    发布单位:

    美国-美国材料与试验协会(US-ASTM)

    标准状态:

    现行

    标准号:

    ASTM A471/A471M-19(2024)

    发布时间:

    2024-03-01

    中标分类:

    -

    国标分类:

    77.140.85 钢铁产品 - 钢铁锻件

    实施时间:
    摘要: 1.1This specification covers vacuum-treated alloy steel forgings intended for use as turbine rotor disks and wheels.1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
  • 真空吸尘器过滤袋用纸的标准规范

    发布单位:

    美国-美国材料与试验协会(US-ASTM)

    标准状态:

    现行

    标准号:

    ASTM F430-13(2024)

    发布时间:

    2024-01-01

    中标分类:

    -

    国标分类:

    85.080 造纸技术 - 纸制品

    85.080.99

    实施时间:
    摘要: 1.1This specification covers procedures to be followed for qualifying papers to be used in the manufacture of vacuum cleaner bags and filters. The filtration efficiency of the paper is not evaluated with the use of these test methods.1.2The procedures appear in the following sections:ProcedureSectionsAir Permeability (Test MethodD737)3 –5Basis Weight (TAPPI Test Method T 410)6 –8Bursting Strength (Mullen Test) (TAPPI Test Method T 403)9 –11Internal Tearing Resistance (TAPPI Test Method T 414)12 –14Tensile Breaking Strength (TAPPI Test Method T 494)15 –171.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ======4.1Air permeability is an important factor in the performance of vacuum cleaner bag filter media, because it is a direct indicator of the resistance to air flow. It may also indicate the size of vacuum cleaner bag needed to achieve the desired air flow volume.4.2Performance specifications, both industrial and military, have been set up on the basis of air permeability and are used in the purchase of materials where permeability is of interest.4.3Since air permeability is not a linear function of pressure differential between paper surfaces, all tests should be made at a prescribed pressure differential, 0.5 in. (12.7 mm) of water.
  • 木质素干物质含量的测定烘箱干燥和冷冻干燥法

    发布单位:

    国际组织-国际标准化组织(IX-ISO)

    标准状态:

    现行

    标准号:

    ISO 6350:2024

    发布时间:

    2024-02-14

    中标分类:

    -

    国标分类:

    85.040 造纸技术 - 纸浆

    实施时间:
    摘要: This document describes methods for the determination of the dry matter content of lignins by oven-drying and freeze-drying. The methods are applicable to all types of lignins isolated from kraft, organosolv, soda, and sulfite pulping processes, and to lignin obtained by enzymatic or acid hydrolysis of biomass. However, the oven-drying method is not applicable to kraft lignins in the base form, also referred to as sodium form. Both methods are applicable only to lignins in the solid form.
  • 发布单位:

    中国-行业标准-机械(CN-JB)

    标准状态:

    现行

    标准号:

    JB/T 14362-2023

    发布时间:

    2023-08-16

    中标分类:

    J32 机械 - 加工工艺 - 锻压

    国标分类:

    77.140.85 钢铁产品 - 钢铁锻件

    实施时间:

    2024-02-01

  • 发布单位:

    中国-行业标准-机械(CN-JB)

    标准状态:

    现行

    标准号:

    JB/T 14361-2023

    发布时间:

    2023-08-16

    中标分类:

    J32 机械 - 加工工艺 - 锻压

    国标分类:

    77.140.85 钢铁产品 - 钢铁锻件

    实施时间:

    2024-02-01

  • 发布单位:

    中国-行业标准-机械(CN-JB)

    标准状态:

    现行

    标准号:

    JB/T 14360-2023

    发布时间:

    2023-08-16

    中标分类:

    J32 机械 - 加工工艺 - 锻压

    国标分类:

    77.140.85 钢铁产品 - 钢铁锻件

    实施时间:

    2024-02-01

  • 发布单位:

    中国-行业标准-机械(CN-JB)

    标准状态:

    未生效

    标准号:

    JB/T 14452-2023

    发布时间:

    2023-12-29

    中标分类:

    J32 机械 - 加工工艺 - 锻压

    国标分类:

    77.140.85 钢铁产品 - 钢铁锻件

    实施时间:

    2024-07-01

  • 发布单位:

    中国-行业标准-机械(CN-JB)

    标准状态:

    未生效

    标准号:

    JB/T 14451-2023

    发布时间:

    2023-12-29

    中标分类:

    J32 机械 - 加工工艺 - 锻压

    国标分类:

    77.140.85 钢铁产品 - 钢铁锻件

    实施时间:

    2024-07-01

    • 客服微信

    • 服务号