-
耐环境的铜压接电接头FSC 5940
发布单位:美国-美国机动车工程师协会(US-SAE)
标准状态:现行
标准号:SAE AS81824E
发布时间:2024-01-09
中标分类:-
国标分类:-
实施时间:摘要: The AS81824 specification covers environment resistant, permanent crimp type, splices having heat shrinkable insulating sleeve and meltable environmental seals or heatless sealing sleeves. The splices may be used with tin, nickel, and silver-plated conductors in applications where the total temperature of the splice application does not exceed 200 °C or as specified in the detail specification. -
0.50Cr-0.55Ni-0.20Mo(0.25-0.35C)(SAE 8630 Mod)正火和回火熔模铸造钢
发布单位:美国-美国机动车工程师协会(US-SAE)
标准状态:现行
标准号:SAE AMS5334J
发布时间:2024-01-19
中标分类:-
国标分类:-
实施时间:摘要: This specification covers a low-alloy steel in the form of investment castings. -
地毯水抽取式清洁剂
发布单位:美国-美国机动车工程师协会(US-SAE)
标准状态:现行
标准号:SAE AMS1631D
发布时间:2024-01-19
中标分类:-
国标分类:-
实施时间:摘要: This specification covers one type of carpet cleaner in the form of a liquid. -
4.[标准] Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems
流体动力系统微粒污染的航空航天显微测量和计数
发布单位:美国-美国机动车工程师协会(US-SAE)
标准状态:现行
标准号:SAE AS598A
发布时间:2024-01-09
中标分类:-
国标分类:-
实施时间:摘要: This SAE Aerospace Standard (AS) defines the materials, apparatus and procedure for microscopic sizing and counting of particulate contamination of fluid power systems by membrane filtration using microscopic counting. -
热电偶可拆卸压接引脚电连接器触点(适用于MIL-DTL-6482系列2、AS81703系列3、MIL-DTL-83723系列I和III以及MIL-DTL-883733连接器)
发布单位:美国-美国机动车工程师协会(US-SAE)
标准状态:现行
标准号:SAE AS39029/9D
发布时间:2024-01-16
中标分类:-
国标分类:-
实施时间: -
用于水性磁粉检测的水调节剂
发布单位:美国-美国机动车工程师协会(US-SAE)
标准状态:现行
标准号:SAE AS4792C
发布时间:2024-01-16
中标分类:-
国标分类:-
实施时间:摘要: This SAE Aerospace Standard (AS) covers water conditioning agents used to facilitate aqueous wet-method magnetic particle inspection. -
软管组件 柔性 低压 无泄漏 饮用水 直对直(稳定:2024年1月)
发布单位:美国-美国机动车工程师协会(US-SAE)
标准状态:现行
标准号:SAE AS1473C
发布时间:2024-01-16
中标分类:-
国标分类:-
实施时间: -
8.[标准] HOSE ASSEMBLY, SEMI-RIGID, LOW PRESSURE, FLARELESS, POTABLE WATER, 45° TO 45° (Stabilized: Jan 2024)
软管组件 半刚性 低压 无泄漏 饮用水 45°至45°(稳定:2024年1月)
发布单位:美国-美国机动车工程师协会(US-SAE)
标准状态:现行
标准号:SAE AS1486A
发布时间:2024-01-16
中标分类:-
国标分类:-
实施时间: -
软管组件 半刚性 低压 无泄漏 饮用水 直对直(稳定:2024年1月)
发布单位:美国-美国机动车工程师协会(US-SAE)
标准状态:现行
标准号:SAE AS1483A
发布时间:2024-01-16
中标分类:-
国标分类:-
实施时间: -
联轴器 V形保持架 单闩锁 II型薄型
发布单位:美国-美国机动车工程师协会(US-SAE)
标准状态:现行
标准号:SAE AS1895/4H
发布时间:2024-01-16
中标分类:-
国标分类:-
实施时间: -
可拆卸压接插座电连接器触点(用于MIL-DTL-38999系列II、MIL-DTL-83733和MIL-DTL-24308连接器的热电偶)
发布单位:美国-美国机动车工程师协会(US-SAE)
标准状态:现行
标准号:SAE AS39029/89B
发布时间:2024-01-16
中标分类:-
国标分类:-
实施时间: -
运输类(第25部分)和通用航空(第23部分)飞机发动机电子控制系统集成指南
发布单位:美国-美国机动车工程师协会(US-SAE)
标准状态:现行
标准号:SAE AIR5924B
发布时间:2024-01-16
中标分类:-
国标分类:-
实施时间:摘要: This SAE Aerospace Information Report (AIR) provides methodologies and approaches that have been used to install and integrate full-authority-digital-engine-control (FADEC) systems on transport category aircraft. Although most of the information provided is based on turbofan/turboprop engines installed on large commercial transports, many of the issues raised are equally applicable to corporate, general aviation, regional, and commuter aircraft, and to military installations, particularly when commercial aircraft are employed by military users. The word “engine” is used to designate the aircraft propulsion system. The engine station designations used in this report are shown inFigures 1to3.Most of the material concerns an electronic engine control (EEC) with its associated software and its functional integration with the aircraft. However, the report also addresses the physical environment associated with the EEC and its associated wiring and sensors.Since most current transport category engines use dual-channel FADEC systems, this is the configuration addressed by this report. A typical FADEC system configuration is shown inFigure 4. -
螺栓 集群配件 双端口无法兰
发布单位:美国-美国机动车工程师协会(US-SAE)
标准状态:现行
标准号:SAE AS21940B
发布时间:2024-03-01
中标分类:-
国标分类:-
实施时间: -
接头组件 三通 在管路上轴向型锻 内部端口端在侧面 液压 最高1500 PSI
发布单位:美国-美国机动车工程师协会(US-SAE)
标准状态:现行
标准号:SAE AS6446A
发布时间:2024-03-01
中标分类:-
国标分类:-
实施时间: -
压接式接线片 铜 不绝缘 标志舌 尺寸8-000 I型 I级 适用于150°C的总导体温度
发布单位:美国-美国机动车工程师协会(US-SAE)
标准状态:现行
标准号:SAE AS25189C
发布时间:2024-03-01
中标分类:-
国标分类:-
实施时间: -
端子、接线片和接头、导体、压接式、接头、电气、锡须电阻(永久性、II型、1级) 导体总温度为105°C
发布单位:美国-美国机动车工程师协会(US-SAE)
标准状态:现行
标准号:SAE AS7928/10E
发布时间:2024-03-01
中标分类:-
国标分类:-
实施时间: -
端子、接线片和接头、导体、压接式、铜端子、接线耳、压接型、铜、绝缘、环舌 用于薄壁电线 II类1级 导体总温度为105°C
发布单位:美国-美国机动车工程师协会(US-SAE)
标准状态:现行
标准号:SAE AS7928/1F
发布时间:2024-03-01
中标分类:-
国标分类:-
实施时间: -
18.[标准] FERRULE, OUTER, UNINSULATED, SHIELD TERMINATING, TYPE I, TWO PIECE, CLASS I, FOR SHIELDED CABLES
屏蔽电缆用外部非绝缘屏蔽端接I型两件式I级套圈
发布单位:美国-美国机动车工程师协会(US-SAE)
标准状态:现行
标准号:SAE AS21980C
发布时间:2024-03-01
中标分类:-
国标分类:-
实施时间: -
机器用螺栓 双六角加长垫圈头 耐腐蚀和耐热钢 UNS S66286 最小130 KSI .1900-32 unf-3A
发布单位:美国-美国机动车工程师协会(US-SAE)
标准状态:现行
标准号:SAE AS9556F
发布时间:2024-02-27
中标分类:-
国标分类:-
实施时间: -
UNS N0660镍合金套件安全电缆(稳定:2024年2月)
发布单位:美国-美国机动车工程师协会(US-SAE)
标准状态:现行
标准号:SAE AS3509C
发布时间:2024-02-27
中标分类:-
国标分类:-
实施时间: