Storage and handling of willow from short rotation coppice

摘要

During the project two main storage and drying trials were organised. The first trial in 1996 consisted of 14 piles of 6 different size material (whole shoots, via 200 mm chunk, 100 mm chunk, 50 mm chip, 28 mm chips, 25 mm chips) and six different methods of covering: Open air storage, storage under plastic cover, storage under top-cover, airtight storage, unventilated storage under roof, and intermittent ventilation (cooling) under roof. The drying trial in 1997 which consisted of four piles was established in Horsens in the same building as the ventilated trials the year before. Only Austoft 50 mm chips were used for this trial. The four piles were established in February and removed in May. Based on all the results of the trials the following conclusions can be drawn: Storage of willow from short rotation coppice is very difficult. Fine chips, such as producted by the two main harvesting machines Claas and Austoft are not suitable for storage over prolonged periods of time (more than 2 months); fine chips loose a large amount of dry matter and a lot of their lower heating value; fine chips also have a heavy infestation of micro-organisms which might cause working environment problems; short rotation coppice is best delivered straight into the heating plants during harvest; if short rotation coppice has to be stored, then this should be done as whole shoots or large chunk; if short rotation coppice has to be stored as chips for a longer period of time (more than two months), then these chips should be sealed airtight as silage. (EG) EFP-94; EFP-95; EFP-96. 10 refs.