Hybrid position-admittance realization of an adaptive output super-twisting controller for a robotic scalpel

摘要

This study proposes the design and implementation of a hybrid robust automatic controller based on the application of a high order sliding mode algorithm for a robotic scalpel prototype (RS). Two fully actuated arms with three degrees of freedom constitute the RS, one arm holds the sample and the second one has the scalpel to exert the cutting task. Each arm is attached to its corresponding cartesian robotic platform. The available measurements are the angular displacements, the linear displacement and the force vector describing the interaction between the scalpel and the biological sample. A hybrid position-admittance controller implements an output-based adaptive distributed super-twisting algorithm to mobilize the RS. A high order sliding mode observer estimates the unknown angular and linear velocities that were used in the hybrid controller. Once the end-effector of each arm reaches the desired cutting position, the designed controller switches to the admittance controller to avoid damaging the surrounding tissue. Numerical simulations show the advantages of the suggested controller in comparison with classical algorithms. The hybrid sliding mode admittance controller has been successfully evaluated on an self-constructed platform. The experimental results show a precise cut and efficient mobilization of the RS compared to other classical controllers such as proportional-differentiator, proportional-integral and first order sliding mode controllers.