An Automatic Process Monitoring Method Using Recurrence Plot in Progressive Stamping Processes

摘要

In progressive stamping processes, condition monitoring based on tonnage signals is of great practical significance. One typical fault in progressive stamping processes is a missing part in one of the die stations due to malfunction of part transfer in the press. One challenging question is how to detect the fault due to the missing part in certain die stations as such a fault often results in die or press damage, but only provides a small change in the tonnage signals. To address this issue, this article proposes a novel automatic process monitoring method using the recurrence plot (RP) method. Along with the developed method, we also provide a detailed interpretation of the representative patterns in the recurrence plot. Then, the corresponding relationship between the RPs and the tonnage signals under different process conditions is fully investigated. To differentiate the tonnage signals under normal and faulty conditions, we adopt the recurrence quantification analysis (RQA) to characterize the critical patterns in the RPs. A parameter learning algorithm is developed to set up the appropriate parameter of the RP method for progressive stamping processes. A real case study is provided to validate our approach, and the results are compared with the existing literature to demonstrate the outperformance of this proposed monitoring method.