首页> 外文学位 >Predictive modeling of thermal inactivation for Listeria monocytogenes in a formulated milk system.
【24h】

Predictive modeling of thermal inactivation for Listeria monocytogenes in a formulated milk system.

机译:配方奶系统中单核细胞增生李斯特菌热失活的预测模型。

获取原文
获取原文并翻译 | 示例

摘要

Listeria monocytogenes is a foodborne pathogen with a low infective dose, survives under stress conditions, has zero tolerance in ready-to-eat foods, and grows at refrigeration temperatures. Two predictive models were developed in a 3 x 3 x 3 factorial experimental design to determine the effects of processing temperature (55°C, 60°C, 65°C), pH (5.0, 6.0, 7.0) and milkfat (0%, 2.5%, 5.0%) on inactivation of L. monocytogenes with regard to survival curve shape, relative heat resistance, and effects of growth conditions before thermal treatment. The two models differed because one used cells grown in the various pH and milkfat levels before inactivation in the same conditions and the other used cells grown in ideal conditions (pH 7.0 and 0% milkfat) before inactivation at other pH and milkfat levels. Data was fit to a modified Gompertz equation where parameter estimates (A, B, C) characterized three regions of a survival curve; shouldering (A), maximum death rate (B) and tailing (C). Regression models using the modified Gompertz equation were based on single and interactive effects of temperature, pH and milkfat. Validation of the models in conditions not tested during model development, but within the testing conditions, indicated that predictions are appropriate for specific processing temperatures in each model. For the model using cells grown in ideal conditions, the shouldering region was significantly (P 0.05) affected by pH; whereas, in the model with cells grown at various pH and milkfat levels, the shouldering region was significantly (P 0.05) affected by temperature, milkfat, and the interaction of temperature and milkfat. The maximum slope was significantly (P 0.05) affected by temperature, milkfat, and the interaction of temperature and milkfat in both models. 4D-values were 50--100% greater at 60 and 65°C for cells grown at pH 6.0 and all milkfat levels compared to cells grown in ideal conditions. The differences between the two models suggested that growth conditions could affect survival curve shape and thermotolerance of L. monocytogenes. Therefore, food microbiologists should consider growth conditions before developing their experimental design because adaptive responses of cells can change depending on food components present during growth and affect the model predictions for L. monocytogenes inactivation.
机译:单核细胞增生李斯特氏菌是一种食源性病原体,具有低感染剂量,可在压力条件下生存,对即食食品的耐受性为零,并在冷藏温度下生长。在3 x 3 x 3阶乘实验设计中开发了两个预测模型,以确定加工温度(55°C,60°C,65°C),pH(5.0、6.0、7.0)和乳脂(0%,在存活曲线形状,相对耐热性以及热处理之前生长条件的影响方面,单核细胞增生李斯特氏菌失活的比例分别为2.5%,5.0%)。两种模型有所不同,因为一个使用了在相同条件下失活之前在各种pH和乳脂水平下生长的细胞,而另一个使用了在其他pH和乳脂水平下灭活之前在理想条件下(pH 7.0和0%乳脂)生长的细胞。将数据拟合到修正的Gompertz方程,其中参数估计值(A,B,C)表征了生存曲线的三个区域。肩(A),最大死亡率(B)和尾矿(C)。使用修正的Gompertz方程的回归模型基于温度,pH和乳脂的单一和交互作用。在模型开发过程中未测试的条件下但在测试条件内的模型验证表明,预测适用于每个模型中的特定处理温度。对于使用在理想条件下生长的细胞的模型,肩部区域受pH显着影响(P <0.05);相反,在具有在不同pH和乳脂水平下生长的细胞的模型中,温度,乳脂以及温度与乳脂之间的相互作用显着影响肩区(P <0.05)。在两个模型中,最大斜率均受温度,乳脂以及温度与乳脂相互作用的影响(P <0.05)。与在理想条件下生长的细胞相比,在pH 6.0和所有乳脂水平下生长的细胞在60和65°C下4D值要高50--100%。两种模型之间的差异表明,生长条件可能会影响单核细胞增生李斯特菌的生存曲线形状和耐热性。因此,食品微生物学家应在制定实验设计之前考虑生长条件,因为细胞的适应性反应会根据生长过程中存在的食物成分而改变,并会影响单核细胞增生李斯特菌失活的模型预测。

著录项

  • 作者

    Chhabra, Amy Tinkey.;

  • 作者单位

    Purdue University.;

  • 授予单位 Purdue University.;
  • 学科 Agriculture Food Science and Technology.
  • 学位 Ph.D.
  • 年度 2000
  • 页码 142 p.
  • 总页数 142
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 农产品收获、加工及贮藏;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号