首页> 外文学位 >Degradation of aflatoxins in peanut meal by extrusion cooking in the presence of nucleophiles.
【24h】

Degradation of aflatoxins in peanut meal by extrusion cooking in the presence of nucleophiles.

机译:在亲核试剂存在下通过挤压蒸煮降解花生粕中的黄曲霉毒素。

获取原文
获取原文并翻译 | 示例

摘要

The frequent contamination of peanuts by aflatoxins poses safety and economic concerns to consumers and industry. There is the need for a reliable method to detoxify contaminated foods. The objective was to develop a processing procedure to degrade aflatoxins in peanut meal using extrusion cooking.; Experiments were designed to determine the efficacy of selected nucleophiles in degrading aflatoxins in aqueous buffers. The degradation rate constant (k) for aflatoxin B1 in the presence of each of the nucleophiles was determined by heating artificially contaminated solutions at 150°C and monitoring aflatoxins using HPLC. At pH 9, the rate constants (k) for lysine, glycine and methylamine were 0.11, 0.09 and 0.08 min−1, respectively.; The results were adapted to study aflatoxin degradation during extrusion, using response surface design (temperature, moisture and pH). Lysine was mixed with peanut meal (at 2%), and the samples extruded in a single screw extruder.; Contour plots from regression models (R2 = 0.85) showed a bimodal effect of moisture on aflatoxin reduction. The linear and quadratic effects of moisture and the interaction between moisture and temperature were significant to the model. Extrusion at 20% moisture and pH8 attained 85% reduction of aflatoxins. The observation that low moisture extrusion conditions promoted aflatoxin reduction led to the study of the effects of viscous dissipation in the next section.; A full factorial design experiment involving starch, nucleophiles, and moisture as variables was followed with both artificially contaminated and naturally contaminated meal. The mixtures were extruded at 150°C, and the throughput, temperature at the die and aflatoxin content determined. The effects of viscous dissipation and shear on aflatoxin reduction, was further studied using a fractional factorial design (die diameter, moisture and temperature). Product nutritional quality was determined using in vitro methods.; Addition of starch lowered aflatoxin reduction, but significant correlation with energy consumption suggests that viscous dissipation influenced aflatoxin degradation. Extrusion of naturally contaminated peanut meal attained 59% reduction, but higher degradation rates (91%) were achieved in the artificially contaminated meal at lower die diameters. Temperature and moisture were the most influential variables in the models for aflatoxin reduction. Throughput was inversely correlated to aflatoxin reduction (r = −0.648, p 0.001). In vitro digestibility and FDNB-available lysine were not different from the non-extruded peanut meal.
机译:黄曲霉毒素对花生的频繁污染给消费者和工业带来安全和经济方面的问题。需要一种可靠的方法对受污染的食物进行排毒。目的是开发一种通过挤压蒸煮降解花生粕中黄曲霉毒素的加工程序。设计实验来确定所选亲核试剂降解水性缓冲液中黄曲霉毒素的功效。黄曲霉毒素B 1 在每种亲核试剂存在下的降解速率常数( k )是通过在150°C下加热人工污染的溶液并使用HPLC监测黄曲霉毒素来确定的。在pH 9时,赖氨酸,甘氨酸和甲胺的速率常数( k )分别为0.11、0.09和0.08 min -1 。使用响应表面设计(温度,湿度和pH),将结果调整为研究挤出过程中黄曲霉毒素的降解。赖氨酸与花生粉混合(2%),样品在单螺杆挤出机中挤出。回归模型(R 2 = 0.85)的等高线图显示了水分对黄曲霉毒素还原的双峰效应。水分的线性和二次效应以及水分和温度之间的相互作用对模型具有重要意义。在水分含量为20%和pH8的条件下挤出,黄曲霉毒素的含量降低了85%。低水分挤出条件促进了黄曲霉毒素的减少,这一发现导致了下一部分对粘性耗散效应的研究。在人工污染和自然污染的膳食中,进行了涉及淀粉,亲核试剂和水分作为变量的全因子设计实验。将混合物在150℃下挤出,并测定通过量,模头温度和黄曲霉毒素含量。使用分数因子设计(模具直径,湿度和温度)进一步研究了粘性耗散和剪切对黄曲霉毒素还原的影响。产品的营养质量通过体外方法测定。淀粉的添加降低了黄曲霉毒素的减少,但是与能量消耗的显着相关表明粘性耗散影响了黄曲霉毒素的降解。天然污染的花生粕的挤出减少了59%,但是在较低的模具直径下,人工污染的花生粕的降解率更高(91%)。温度和湿度是黄曲霉毒素减少模型中影响最大的变量。通量与黄曲霉毒素的减少呈负相关(r = -0.648,p <0.001)。 体外消化率和FDNB可用的赖氨酸与未挤压花生粉没有差异。

著录项

  • 作者

    Saalia, Firibu Kwesi.;

  • 作者单位

    University of Georgia.;

  • 授予单位 University of Georgia.;
  • 学科 Agriculture Food Science and Technology.
  • 学位 Ph.D.
  • 年度 2001
  • 页码 153 p.
  • 总页数 153
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 农产品收获、加工及贮藏;
  • 关键词

  • 入库时间 2022-08-17 11:46:49

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号