首页> 外文学位 >Antimonide-based field-effect transistors and heterojunction bipolar transistors grown by molecular beam epitaxy.
【24h】

Antimonide-based field-effect transistors and heterojunction bipolar transistors grown by molecular beam epitaxy.

机译:通过分子束外延生长的基于锑化物的场效应晶体管和异质结双极晶体管。

获取原文
获取原文并翻译 | 示例

摘要

For the development of novel high-speed devices, the epitaxial growth of antimonide-based compounds and devices, including field effect transistors (FETs) and hetero-junction bipolar transistors (HBTs), was explored using gas-source molecular beam epitaxy (MBE). The first and second parts of the dissertation detail the growth of InAsSb and InGaSb as the channel materials for n- and p-type FETs, respectively. Both compounds were grown metamorphically on InP substrates with a composite AlSb/AlAs0.5Sb 0.5 buffer layer, which was proved to be effective in enhancing the epitaxial quality. By optimizing the growth conditions, the intrinsic carrier mobilities of n-type InAsSb and p-type pseudomorphic InGaSb quantum wells could reach 18000 and 600 cm2/V-s at room temperature, respectively. InAsSb FET showed a high transconductance of 350 mS/mm, which indicated the high potential in the high-speed applications. The third part of the dissertation describes the modification of the emitter-base junction of ultra-fast type-II GaAsSb-based HBTs in order to eliminate the carrier blocking and enhance the current gain. InAlP was used to replace the InP emitter and form a type-I emitter-base junction. Results for large devices show that this modification could improve DC current gain from 80 to 120. The results indicate that type-I/II InAlP/GaAsSb HBTs are promising to achieve better radio-frequency (RF) performance with higher current driving capability.
机译:为了开发新型高速器件,使用气源分子束外延(MBE)探索了基于锑化物的化合物和器件的外延生长,包括场效应晶体管(FET)和异质结双极晶体管(HBT)。 。论文的第一部分和第二部分分别详细介绍了InAsSb和InGaSb作为n型和p型FET沟道材料的增长。两种化合物都在具有复合AlSb / AlAs0.5Sb 0.5缓冲层的InP衬底上变质生长,已证明在提高外延质量方面有效。通过优化生长条件,室温下n型InAsSb量子阱和p型假型InGaSb量子阱的固有载流子迁移率分别可以达到18000和600 cm2 / V-s。 InAsSb FET显示出350 mS / mm的高跨导,这表明在高速应用中具有很高的潜力。论文的第三部分描述了对超快速II型GaAsSb基HBT发射极-基极结的修改,以消除载流子阻塞并提高电流增益。 InAlP用来代替InP发射极并形成I型发射极-基极结。大型设备的结果表明,这种修改可以将直流电流增益从80提高到120。结果表明,I / II型InAlP / GaAsSb HBT有望以更高的电流驱动能力实现更好的射频(RF)性能。

著录项

  • 作者

    Liao, Chi-Chih.;

  • 作者单位

    University of Illinois at Urbana-Champaign.;

  • 授予单位 University of Illinois at Urbana-Champaign.;
  • 学科 Engineering Electronics and Electrical.
  • 学位 Ph.D.
  • 年度 2011
  • 页码 71 p.
  • 总页数 71
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号