Performance of actinic EUVL mask imaging using a zoneplate microscope

摘要

The SEMATECH Berkeley Actinic Inspection Tool (AIT) is a dual-mode, scanning and imaging extreme-ultraviolet (EUV) microscope designed for pre-commercial EUV mask research. Dramatic improvements in image quality have been made by the replacement of several critical optical elements, and the introduction of scanning illumination to improve uniformity and contrast. We report high quality actinic EUV mask imaging with resolutions as low as 100-nm half-pitch, (20-nm, 5x wafer equivalent size), and an assessment of the imaging performance based on several metrics. Contrast transfer function (CTF) measurements show high contrast imaging for features sizes close to the diffraction-limit An investigation of the illumination coherence shows that AIT imaging is much more coherent than previously anticipated, with a below 0,2. Flare measurements with several line-widths show a flare contribution on the older of 2-3% relative intensity in dark regions above the 1.3% absorber reflectivity on the test mask used for these experiments. Astigmatism coupled with focal plane tilt are the dominant aberrations we have observed The AIT routinely records 250-350 high-quality images in numerous through-focus series per 8-hour shift. Typical exposure times range from 0.5 seconds during alignment, to approximately 20 seconds for high-resolution images.