Controlling Moisture Content of Natural Fibres in RTM-Process

摘要

The quality of composite materials based on natural fibres is highly influence by humidity content of the fibres. For a high product quality in the resin-transfer-moulding (RTM) process a constant humidity content has to be achieved. As the humidity content of the fibres can change relative quickly depending on the humidity, measuring humidity content in the mould is beneficial. Near-lnfrared-Spectroscopy (NIR) is a widely used tool for humidity content measurement allowing determination of the moisture content within seconds. To do so a calibration model with good accuracy is required. To generate the calibration model a dry flax woven fabric is placed in a climate chamber and weight change is recorded as well as NIR-Spectra. By correlating the spectra with the weight increase a model can be developed allowing to assign the spectra with unknown weight. This allows not only monitoring the moisture content of natural fibres with in the mould. Also can the moisture content reduced to an aspired value by applying vacuum to the preheated mould, before starting the resin infusion.