The objective of this thesis is to design and realize a piezoelectric mobile for cooperative use. The term piezoelectric mobile is used in this thesis to describe a piezoelectric miniature robot. This mobile miniature robot is actuated by piezoelectric materials. The aim of the thesis is the design and the realization of a robot that can be miniaturized and could therefore be used in the context of biological mimicry swarms (ants, bees ...) for a cooperative operation.The realized robot consists of a thin support and piezoelectric patches. Piezoelectric patches are bonded on the support on an intelligent manner in order to move the support on land. In this context, the thesis is divided into three parts.The first part is devoted to the modeling of such a system (thin support with piezoelectric patches on one of its faces). Modeling by the finite element method is developed for this system based on the variational principle of Hamilton and considering the Love-Kirchhoff hypothesis. The originality of this model lies in the use of the concept of the neutral plane to model this asymmetric system. This allows modeling the system studied by a finite element model in two dimensions (2D), taking into account the third dimension in the calculation.The second part presents the operating principle of the robot which is inspired by the linear traveling wave ultrasonic motors. This section presents all the stages of the optimal design to create the necessary movements. The optimal design is investigated using finite element modeling obtained in the first part.The third part of this thesis is devoted to the realization of an experimental prototype. The manufacturing process and the associated electronics for the robot are presented in this section. The robot is characterized experimentally by measuring the speed according to the applied voltage, the speed versus mass loaded by the robot and the speed according to the force provided by the robot. This robot is also compared with other similar systems.
展开▼
