首页> 外文OA文献 >Novel monitoring method of gear meshing based on combination of continuous shots with a thermography and prediction of tooth surface temperature by heat circuit network model

【2h】

Novel monitoring method of gear meshing based on combination of continuous shots with a thermography and prediction of tooth surface temperature by heat circuit network model

机译：基于连续射击与热电路网模型的齿面温预测的连续射击组合的齿轮啮合新颖的监测方法

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Toshiki HIROGAKI; Eiichi AOYAMA; Kodai NIWA; Mitsuhiko SUZUKI;
展开▼
作者单位

展开▼
年度 2016
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Investigation of temperature hysteresis on tooth contact surface of hypoid gears using middle-infrared ray imagery based on thermal network model [J] . Toshiki HIROGAKI, Eiichi AOYAMA, Raphael PIHET, Journal of Advanced Mechanical Design, Systems, and Manufacturing . 2014,第3期

机译：基于热网络模型的中红外成像技术研究准双曲面齿轮齿接触面的温度滞后
2. Calculation of Tooth Surface Contact Stress and Tooth Root Bending Stress of the Asymmetric Gear with Double Pressure Angles Meshing Beyond the Pitch Point Based on Friction Between Teeth [J] . Li Xiu-Lian, Sze Kam-Yim, Xu Xu-Song, Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers . 2020,第3期

机译：基于牙齿摩擦的双压角线啮合的双压角度啮合的齿面接触应力和齿根弯曲应力的计算
3. Adaptive data-driven prediction and optimization of tooth flank heat treatment deformation for aerospace spiral bevel gears by considering carburizing-meshing coupling effect [J] . Han Ding, Hongping Li, Rong Huang, International Journal of Heat and Mass Transfer . 2021,第Auga期

机译：通过考虑渗碳啮合耦合效应，自适应数据驱动的预测和牙齿侧翼热处理变形的优化螺旋锥齿轮
4. Novel Monitoring Method of Hypoid Gear Meshing Based on Thermal Network Model and Infrared Thermography Imagery [C] . Mitsuhiko SUZUKI, Toshiki HIROGAKI, Eiichi AOYAMA Proceedings of the ASME international design engineering technical conferences and computers and information in engineering conference 2016 . 2016

机译：基于热网络模型和红外热像仪图像的准双曲面齿轮啮合监测新方法
5. The incorporation of hourly GOES data in a surface heat flux model and its impacts on operational temperature predictions in bodies of water. [D] . Chu, Yi-Fei. 1998

机译：将每小时GOES数据合并到表面热通量模型中及其对水体运行温度预测的影响。
6. Artificial Neural Network and Response Surface Methodology Modeling in Ionic Conductivity Predictions of Phthaloylchitosan-Based Gel Polymer Electrolyte [O] . Ahmad Danial Azzahari, Siti Nor Farhana Yusuf, Vidhya Selvanathan, 2016

机译：邻苯二甲壳聚糖基凝胶聚合物电解质离子电导率预测的人工神经网络和响应面方法建模
7. Analysis and Optimization of Tooth Surface Contact Stress of Gears with Tooth Profile Deviations, Meshing Errors and Lead Crowning Modifications Based on Finite Element Method and Taguchi Method [O] . Qiang Li, Liyang Xie 2020

机译：基于有限元法和塔布芯法的齿形偏差，啮合误差，啮合误差和铅冠改性的齿面接触应力分析与优化
8. Using infrared thermography for the creation of a window surface temperature database to validate computer heat transfer models [R] . Beck, F. A. , Griffith, B. T. , Tuerler, D. , 1995

机译：使用红外热成像技术创建窗口表面温度数据库，以验证计算机传热模型

Novel monitoring method of gear meshing based on combination of continuous shots with a thermography and prediction of tooth surface temperature by heat circuit network model

著录项

引文网络

相似文献

相关主题

期刊订阅