首页>外文期刊>Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers

Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers

Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers

中文名称：中国机械工程师学会杂志C系列：中国机械工程师学会学报

ISSN：0257-9731
出版周期：-

发文量：1162

期刊论文

年度选择

2020
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2019
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2018
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2017
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2016
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2015
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2014
- 第1期
- 第3期
- 第4期
- 第5期
- 第6期
2013
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2012
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2011
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2010
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2009
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2008
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2007
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2006
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2005
- 第2期
- 第3期
- 第5期
- 第6期
2004
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2003
- 第3期
- 第4期
- 第5期
- 第6期
2002
- 第2期
- 第5期
- 第6期
2001
- 第6期
2000
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
1999
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
1998
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期

更多>>

全选（0）

1.Design of a Configurable Cell Controller for Flexible Manufacturing Systems

机译：柔性制造系统可配置单元控制器的设计
- 作者：Yi-Sheng Huang;Pin-June Su
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第3期
- Petri net;
- Cell controller;
- Flexible manufacturing system;
2.Application of Reverse Engineering Technique in Butt Weld Profile Measurement

机译：逆向工程技术在对接焊缝轮廓测量中的应用
- 作者：Chia-Lung Chang;Yen-Hung Chen
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第1期
- Butt weld;
- Weld profile;
- Weld geometry;
- Weld volume;
- Reverse engineering;
3.Effects of Nanoindentation Depth and Annealing Temperature on Microstructural Evolution of Au/Cr/Si Thin Films

机译：纳米压痕深度和退火温度对Au / Cr / Si薄膜组织演变的影响
- 作者：Woei-Shyan Lee;Fang-Jui Fong
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第4期
- Au-Si thin films;
- Nanoindentation;
- Amorphisation;
- Annealing;
- Eutectic phase;
4.Predictions of Springback of Strain-Hardening Material in V-Shaped Bending Process

机译：V形弯曲过程中应变强化材料回弹的预测
- 作者：Tung-Sheng Yang;Sheng-Yi Chang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第5期
- V-shaped bending process;
- Springback;
- Finite element analysis;
- Abductive network;
5.Nonlinear H{sub}∞ Impedance Control for Current-Fed Induction Motor Manipulators

机译：电流感应电动机操纵器的非线性H {sub}∞阻抗控制
- 作者：Ming-Chang Hwang;Chien-Huang Tsai
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第3期
- RLED manipulators;
- Nonlinear H{sub}∞ control;
- Generalized impedance control;
- Current-fed induction motors;
6.Development of micro diamond grinding tool with micro EDM and composite electroforming

机译：利用微细电火花和复合电铸技术开发微细金刚石磨具
- 作者：Shun-Tong Chen;Yun-Cheng Lai;Ching-Chang Liu;Shih-Hao Wang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第5期
- Micro EDM;
- Diamond tool;
- Composite electroforming;
7.Chaos and Bifurcation of a Rub-Impact Rigid Rotor Supported by Oil Film Bearings

机译：油膜轴承支撑的碰摩刚性转子的混沌与分叉
- 作者：Cai-Wan Chang-Jian;Chao-Kuang Chen
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第1期
- Rotor-bearing system;
- Rub-impact;
- Chaos;
- Bifurcation;
- Short bearing;
- Rigid rotor;
8.Path Planning for the Automatic Pile Setting out

机译：自动排桩的路径规划
- 作者：Shih-Shin Chen;Kuang-Chyi Lee
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第1期
- Pile setting out;
- Artificial immune system algorithm;
- Optimal path planning;
9.Study of estimation of damping coefficient and angular displacement for air motor rotation experiment

机译：气动马达旋转实验阻尼系数和角位移估计的研究
- 作者：Zone-Ching Lin;Chen-Jenq Huang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第4期
- Damping coefficient;
- Inverse model;
- Air motor;
10.Dynamic Analysis and Control of 3D Flexible Mechanisms Using Nonlinear Recursive Method in Multibody Automation Systems

机译：多体自动化系统中使用非线性递归方法的3D柔性机构动态分析和控制
- 作者：Yunn-Lin Hwang;Zhen-You Wei
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第2期
- 3D flexible mechanisms;
- Nonlinear recursive method;
- Multibody automation systems;
11.Development of CMP Knowledge-Based Multi-Agent System by Application of Ontology

机译：基于本体的CMP基础知识多Agent系统开发
- 作者：Zone-Ching Lin;Chein-Chung Chen;Shing-Huei Lin
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第5期
- Agent;
- Ontology knowledge;
- TRIZ;
- CMP;
12.Study on Energy Transfer Mechanism of a Turbo Charged Diesel Engine

机译：涡轮增压柴油机的能量传递机理研究
- 作者：Ya-Wei Lee
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第2期
- NARMAX;
- Dynamic behavior;
- GFRFs;
13.Ultrasonic Fatigue Testing of Aluminum and Magnesium Alloys

机译：铝和镁合金的超声波疲劳测试
- 作者：Yeong-Jern Chen;Bai-Sen Wei;Wen-Nong Hsu
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第4期
- Ultrasonic fatigue;
- Resonant specimen;
- Finite element method;
- Aluminum alloy;
- Magnesium alloys;
14.Model-Free Adaptive Sliding Controller for Automotive Active Suspensions

机译：汽车主动悬架的无模型自适应滑动控制器
- 作者：Hung-Yi Chen;Shiuh-Jer Huang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第1期
- Automotive active suspensions;
- Adaptive sliding controller;
- Fuzzy compensation;
15.Correction of Wave Dispersion Effect in Split-Hopkinson Pressure Bar System Using Discrete Fourier Transformation

机译：离散傅里叶变换校正Split-Hopkinson压杆系统中波的色散效应
- 作者：Woei-Shyan Lee;Chen-Yang Liu;Po-Kai Wang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第5期
- Discrete Fourier Transformation;
- SHPB;
- Wave dispersion;
- Signal processing;
- Frequency;
16.Laser Direct Writing of Diamond Micro-nozzle Using Q-Switched Nd:YAG Laser

机译：使用调Q Nd：YAG激光器对金刚石微喷嘴进行激光直接写入
- 作者：Xiang-Rui Chou;Jia-Xing Wang;Jeng-Shyong Chen
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第4期
- Nd-YAG laser;
- Micro-machining;
- Diamond;
- Optical nonlinear absorption;
17.Evaluation of Notch Geometry Design by Fracture Energy Method for Forgeability Test

机译：用断裂能法评估缺口几何设计的可锻性
- 作者：Rong Shean Lee;Yen Ju Chen
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第4期
- Notch geometry design;
- Forgeability test;
- Fracture energy method;
18.Tracking for Photovoltaic Power System

机译：跟踪光伏发电系统
- 作者：Chen-Chi Chu;Chieh-Li Chen
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第3期
- Photovoltaic;
- Maximum power point tracking;
- Solar energy;
- Conversion;
19.An Analysis of Turbulent Film Condensation on an Inclined Tube

机译：斜管上湍流膜的冷凝分析
- 作者：Hai-Ping Hu;Rong-Hua Yeh
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第4期
- Inclined;
- Eddy;
- Turbulent;
20.Development of a Low-Cost Micro-CMM with Nanoscale Touch Trigger Probe and Novel Optical Encoder

机译：具有纳米级触摸触发探针和新型光学编码器的低成本微型CMM的开发
- 作者：Chih-Liang Chu;Yu-Hung Liou
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第6期
- Micro-Coordinate Measuring Machine;
- Optical encoder;
- Double-arch-bridge structure;
21.Fundamental Understanding of BGA Packaging Subjected to Vibration Loads

机译：对振动载荷下BGA包装的基本了解
- 作者：Mei-Ling Wu
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第6期
- Finite element analysis;
- Vibration failure;
- Ball grid array(BGA) packaging;
22.Dynamic Investigation and Adaptive Tracking-Error Improvement of Optical Disk Drives

机译：光盘驱动器的动态调查和自适应跟踪误差改善
- 作者：Min-Chun Pan;Min-Der Wu
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第4期
- Imbalancing;
- Optical disc drive;
- Tracking-error improvement;
- Adaptive feedforward cancellation;
23.Composite Adaptive Speed Controller and Rotor Resistance Estimator for Induction Motor Drives Based on Passivity Theorem

机译：基于无源定理的感应电动机驱动器复合自适应速度控制器和转子电阻估计器
- 作者：Jenn-Yih Chen;Bean-Yin Lee
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第1期
- Composite adaptive speed controller;
- Rotor resistance estimator;
- Passivity;
24.Based on SCOR Model to Structure a Defense System of Collaborative Logistics Management

机译：基于SCOR模型的协同物流管理防御体系构建
- 作者：Kou-Huang Chen;Chien-Hsin Lin;Tien-Hsiung Chu;Kuang-Chung Huang;Jui-Chin Jiang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第6期
- Supply chain management;
- Business process reengineering;
- Value chain;
- Supply chain operation reference model;
25.Wake Flow Analysis of a Vortex Shedder Situated Downstream of Double Elbows Out-of-Plane

机译：位于双平面外弯头下游的涡旋流道的尾流分析
- 作者：Reynard Karman;Jiun-Jih Miau
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第6期
- Wake flow;
- MEMS sensor;
- Vortex flowmeter;
26.FEA Study on Electromagnetic Forming of Hydrodynamic Herringbone-Groove Bearing for High Speed Miniature Motors

机译：高速微型电动机液动人字槽轴承电磁成形的有限元分析
- 作者：Sy-Wei Lo;Shui-Fa Tsai
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第2期
- Hydrodynamic bearing;
- Electromagnetic forming;
- Herringbone groove;
- Finite element analysis;
27.Structural Synthesis of Zhang Heng's Seismoscope with a Rope-and-pulley Mechanism

机译：张衡带绳滑轮机制的结构综合
- 作者：Hong-Sen Yan;Kuo-Hung Hsiao
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第2期
- Zhang Heng' seismoscope;
- Structural synthesis of mechanism;
- History of machinery;
- Rope;
- Pulley;
28.Reduction of Photo Leakage Current of Hydrogenated Amorphous Silicon Thin Film Transistors

机译：降低氢化非晶硅薄膜晶体管的漏光电流
- 作者：Yu-Ting Liu;Huei-Huang Lee;Sheng-Jye Hwang;Durn-Yuan Huang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第5期
- Photo leakage current;
- Hydrogenated amorphous silicon thin film transistors;
29.Directional Spin Coating and Its Feasibility for Fabrication of Polymeric Light Emitting Diodes

机译：定向旋涂及其在制备高分子发光二极管中的可行性
- 作者：J.-W. John Cheng;Jeng-Rong Ho;Tzu-Yang Peng;Nan-Yi Wu;Chin-Min Huang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第4期
- Directional spin coating;
- Organic light emitting diode;
- Polymeric light emitting diode;
- Micro patterning;
30.Structural Analysis of the 3-PRS Mechanism of a Serial-Parallel Machine Tool

机译：串并联机床3-PRS机构的结构分析
- 作者：Ting-Nung Shiau;Yi-Jeng Tsai;Ting-Chia Yan;Meng-Shiun Tsai
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第2期
- Serial-parallel machine tool;
- Natural frequency;
- Joint stiffness;
- Structural analysis;
31.Acceleration/Deceleration Prior Interpolation with Corner Feedrate Control

机译：带角进给率控制的加/减速先插值
- 作者：Chung-Wei Cheng
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第1期
- Acceleration/deceleration;
- Interpolation;
- Corner contouring error;
32.Development of a 2-axis Closed Loop Micro-/Nano- Positioning Stage Embedded with 2 Fiber Optical Interferometer Systems

机译：嵌入2个光纤干涉仪系统的2轴闭环微/纳米定位平台的开发
- 作者：Fang-Jung Shiou;Hsuen-Feng Hsu;Chao-Jung Chen;Huay-Chung Liou
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第6期
33.Conceptual Innovation of a Prosthetic Hand Using TRIZ

机译：使用TRIZ修复手的概念创新
- 作者：Wen-Tung Chang;Ching-Huan Tseng;Long-long Wu
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第2期
- Prosthetic hand;
- TRIZ;
- Gripping device;
- Finger mechanism;
- Planar linkage;
34.Nonlinear Dynamics of Rotor Bearing System in Deformable Housing Subjected to Stator Rubs and Contour Error of Shaft Due to Manufacturing

机译：受制于定子摩擦和轴轮廓误差的可变形壳体中转子轴承系统的非线性动力学
- 作者：Chia-Ming Chang;Chun-Pao Kuo
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第2期
- Rotor dynamic;
- Nonlinear response;
35.Dynamics of Dual Rub-Impact Rotors/Stators Equipped with Long Journal Bearings

机译：装有长轴颈轴承的双冲击转子/定子的动力学
- 作者：Cai-Wan Chang-Jian
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第5期
- Dual-rotors;
- Nonlinear suspension;
- Long journal bearing;
- Rub-impact;
36.A Programmable Geared Seven-bar Mechanism for Mechanical Forming Presses

机译：用于机械成型压力机的可编程齿轮七杆机构
- 作者：Ren-Chung Soong;Kuei-Shu Hsu;Feng-Tsai Weng
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第1期
- Programmable;
- Geared seven-bar mechanism;
- Mechanical Press;
37.The Bifurcation Analysis of the Rotor-Bearing System Supported by Oil-Film Journal Bearing and Thrust Bearing

机译：油膜轴颈轴承和推力轴承支撑的转子轴承系统的分叉分析
- 作者：Cai-Wan Chang-Jian
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第3期
- Rotor-bearing system;
- Bifurcation;
- Thrust bearing;
- Side leakage effect;
38.Analysis and Modeling of an Electro-Hydro-Mechanical Variable Valve Actuator for Automobile Engines

机译：汽车发动机电动液压可变气门执行器的分析与建模
- 作者：Pak-Kin Wong
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第3期
- Electro-hydro-mechanical actuator;
- Fully variable engine valve train;
- Dynamic model;
39.Simulation and Experimental Measurement of Flow Field within Four-Stroke motorcycle engines

机译：四冲程摩托车发动机内流场的仿真与实验测量
- 作者：Li-Ming Chu;Min-Hsing Chang;Hsiang-Chen Hsu;Wen-Tung Chien;Chien-Heng Liu
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第2期
- Four-stroke motorcycle engine;
- Flow field analysis;
40.An Experimental Investigation on Silicon Wafer Thinning Process

机译：硅晶圆减薄工艺的实验研究
- 作者：Chuan-Chieh Lin;Hong-Tsu Young;Jing-Pou Zhan
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第5期
- Silicon wafer;
- Backside thinning;
- Wet etching;
- Batch process;
41.A Neural Networks Approach Combined with Taguchi's Method for IC Leadframe Dam-bar Shearing Process

机译：神经网络方法与Taguchi方法相结合的IC引线框架大坝-钢筋剪切过程
- 作者：Zone-Ching Lin;Dar-Yuan Chang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第5期
- Neural networks;
- Taguchi's method;
- Metal shearing;
42.The Novel Adaptive Sliding Mode Position Control for Synchronous Reluctance Motor Drive

机译：同步磁阻电机驱动的新型自适应滑模位置控制
- 作者：Chien-An Chen;Huann-Keng Chiang;Bor-Ren Lin
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第3期
- Synchronous reluctance motor;
- Adaptive sliding mode control;
- Position control;
- Lyapunov function;
43.Integrated Two Hopfield Neural Networks for Automatic LED Defect Inspection

机译：集成了两个Hopfield神经网络，可自动检查LED缺陷
- 作者：Chuan-Yu Chang;Chuan-Wang Chang;Si-Yan Lin;MuDer Jeng
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第1期
- Hopfield Neural networks;
- LED;
- Defect inspection;
44.Simulation and Design of Multiple-Station Rolling Forming for U-Section Steel Bar

机译：U型钢多工位轧制模拟设计
- 作者：Chin-Wei Lin;Huei-Huang Lee;Sheng-Jye Hwang;Durn-Yuan Huang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第5期
- Roll forming mold design;
- DEFORM;
- Continuous multiple station;
45.A Study of Deformation and Stress-Strain Distribution of Nano-scale Rod Under Bending Load by Molecular Dynamics and FEM

机译：纳米棒在弯曲载荷下的变形和应力应变分布的分子动力学和有限元研究
- 作者：Zone-Ching Lin;Jen-Ching Huang;Yen-Chieh Chao
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第1期
- Molecular dynamics;
- Finite element method;
- Bending;
- Nano-scale thin film;
- Stress-strain behavior;
46.Production Control and Characterization of Bilayer-Surfactant Coated Stable Water-Soluble Monodisperse Magnetic Iron Oxide Nanoparticle

机译：双层表面活性剂包覆的稳定水溶性单分散磁性氧化铁纳米粒子的生产控制与表征
- 作者：Chih-Jung Chen;Hsin-Yi Lai
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第6期
- Monodisperse magnetic nanoparticles;
- Bilayer surfactant method;
- Water based ferrofluids;
- Colloidal stability;
47.Monitoring Implement on DSP-Based Lathe System with Optimum MRR Theory

机译：最优MRR理论的基于DSP的车床系统监控实现
- 作者：Kuei-Shu Hsu;Ko-Chun Chen;Ren-Chung Soong;Feng-Tsai Weng
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第3期
- Material removal rate;
- Lathe control;
- Human-machine interface;
- Surface roughness;
48.The Study of a New Structure of Fiber Bragg Grating with FFPI Filter for Force Sensing

机译：基于FFPI滤波器的光纤光栅力传感新结构的研究。
- 作者：Yi-Cheng Huang;Jia-Ling Tsai;Fong-You Lee
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第5期
- FBG;
- Fabry-Perot Interferometer;
- Strain Sensor;
49.Development of super high slenderness ratio micro channels using precision filled wax electroforming

机译：使用精密填充蜡电铸技术开发超高长细比微通道
- 作者：Shun-Tong Chen;Hsing-Cheng Su;Yunn-Shiuan Liao;Hong-Ye Yang;Yuch-Chang Tasi
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第4期
- Wire EDM;
- Super high slenderness ratio;
- Micro channel;
- Electroforming;
50.Sense and Control of a Companion Robot

机译：伴侣机器人的感测和控制
- 作者：Fu-Cheng Wang;Hsiao-Wu Wang;Pei-Kang Chen;Hon-Ming Lin;Kuang-Chao Fan
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第6期
- Companion robot;
- Tactile sensor;
- Network;
- Embedded system;
51.Semi-Active Augmented H{sub}∞ Control of Vehicle Suspension Systems with MR Dampers

机译：具有MR阻尼器的车辆悬架系统的半主动增强H {sub}∞控制
- 作者：Feng Tyan;Shun-Hsu Tu;Wes S. Jeng
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第3期
- Magnetorheological fluid (MRF) damper;
- Semi-active control;
- Suspension system;
- Augmented H{sub}∞ controller;
52.Application of the Interval Genetic Algorithm Technique for the Interval Optimization of a Disk Type Piezoelectric Motor

机译：区间遗传算法技术在盘式压电电机区间优化中的应用
- 作者：Ting-Nung Shiau;Chung-Hao Kang;De-Shin Liu
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第6期
- Interval optimization;
- Interval genetic algorithm;
- Piezoelectric motor;
- Multi-objectives;
- Single-objective;
- Constrained interval;
53.Full Coverage of Two-Phase Transports in a Porous Electrode of a PEM Fuel Cell

机译：PEM燃料电池多孔电极中两相输运的完全覆盖
- 作者：Jenn-Jiang Hwang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第3期
- PEM fuel cell;
- Model;
- Two-phase transports;
54.Multi-Objective Optimal Design of Rotor-Bearing Systems under Dynamic Behavior Constraints Using a Hybrid Genetic Algorithm

机译：动态行为约束下转子轴承系统的多目标优化混合遗传算法
- 作者：Ting-Nung Shiau;Chung-Hao Kang;De-Shin Liu
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2008年第3期
55.Numerical Experiments with Several Variant WENO Schemes for the Compressible Viscous Flow Computations

机译：可压缩粘性流计算的几种变式WENO方案的数值实验
- 作者：Tsang-Jen Hsieh;Ching-Hua Wang;Jaw-Yen Yang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第3期
- WENO scheme;
- Anti-diffusive flux corrections;
- Mapped WENO scheme;
56.Mathematical Model of the ZN-Type Worm Gear set with a Non-ninety-degree Crossing Angle and Undercutting Analysis of Worm Wheel Tooth Surfaces

机译：非90度交叉角ZN型蜗轮的数学模型及蜗轮齿面的咬合分析。
- 作者：Kuan-Yu Chen;Chung-Biau Tsay
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第4期
- Mathematical Model;
- ZN-type Worm;
- Worm-type Hob Cutter;
- ZN-type Worm Wheel;
- Non-ninety-degree Crossing Angle;
- Tooth Undercutting;
57.Design of Variable Coupler Curve Four-bar Mechanisms

机译：可变耦合器曲线四杆机构的设计
- 作者：Ren-Chung Soong;Sun-Li Wu
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第3期
- Variable coupler curve;
- Four-bar mechanism;
- Continuous path generation;
58.Thickness Scaling Characterization of Thermoelectric Module for Small-scale Electronic Cooling

机译：小型电子冷却用热电模块的厚度缩放特性
- 作者：Kuen-Hsien Wu;Chen-I Hung
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第6期
- Thennoelectric module;
- Scaling effect;
- Electronic cooling;
- ANSYS;
59.Magnetic Effect on the Goertler Vortices in Mixed Convection Flow Over a Rotating Concave Surface

机译：旋转凹面上混合对流中对Goertler涡流的磁效应
- 作者：Ming-Han Lin;Chin-Tai Chen
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第1期
- Mixed convection;
- Magnetic effect;
- Goertler vortices;
- Rotation;
60.Development of a Highly Linear Temperature Sensor and Voltage Reference

机译：高度线性的温度传感器和电压基准的开发
- 作者：Chih-Peng Liu;Han-Pang Huang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第1期
- Temperature Sensor;
- Voltage Reference;
- PTAT;
61.Analysis of Moire Pattern for Micro-range Measurements based on Continuous Wavelet Transform

机译：基于连续小波变换的微距测量莫尔条纹分析
- 作者：Jin-Yi Sheu;Yeu-Jent Hu;Chih-Yi Huang;Jiunn-Chyi Lee
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第5期
- CWT;
- Moire;
- Grating;
62.A Machine Tool Performance Monitoring System for Use on Common Hand-held Devices

机译：用于普通手持设备的机床性能监控系统
- 作者：Chung-Chi Huang;Shang-Liang Chen;Hsien-Cheng Liou;Wei-Li Wang;Li-Shan Chen;Tyau-Song Huang;Kai-Jen Hou
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第4期
- Hand-Held Devices;
- Machine Tool;
- Performance Monitoring;
63.Design and implementation of the adaptive estimator sliding mode controller for a magnetic ball suspension system

机译：电磁球悬架系统自适应估计器滑模控制器的设计与实现
- 作者：Chien-An Chen;Huann-Keng Chiang;Jing-Chung Shen
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第3期
- Adaptive estimator sliding mode control;
- Magnetic ball suspension system;
- Lyapunov function;
64.Systematic Design of Four-Speed Ravigneaux-Type Automatic Transmissions

机译：四速Ravigneaux型自动变速器的系统设计
- 作者：Cheng-Ho Hsu;Ruei-Hong Huang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第3期
- Automatic transmission;
- Epicyclic gear mechanism;
- Ravigneaux;
65.A PWM constant average current driving technique for solar LED lighting systems

机译：用于太阳能LED照明系统的PWM恒定平均电流驱动技术
- 作者：Bin-Juine Huang;Min-Sheng Wu;Po-Chien Hsu;Chun-Wei Chen;Kuo-Yang Chen
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第6期
66.Co-doping effect of divalent (Mg{sup}(2+), Ca{sup}(2+), Sr{sup}(2+)) and trivalent (Y{sup}(3+)) cations with different ionic radii on ionic conductivity of zirconia electrolytes

机译：具有不同离子性的二价（Mg {sup}（2 +），Ca {sup}（2 +），Sr {sup}（2+））和三价（Y {sup}（3+））阳离子的共掺杂效应半径对氧化锆电解质的离子电导率的影响
- 作者：Tsung-Her Yeh;Chih-Ming Chiang;Wen-Chih Lo;Chen-Chia Chou
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第2期
- Ionic conductivity;
- Ionic radius;
- Co-doping;
- Oxygen vacancy;
- Hard-sphere model;
67.Design and Processing of Novel Hybrid Structure Tubular Heat Pipe for Photoelectric Components

机译：新型光电元件混合结构管状热管的设计与加工
- 作者：Sheng-Chih Shen;Hsin-Jung Huang;Jue-Ching Hsieh;Jung-Kuei Tseng;Cheng-Tang Pan;Huei-Jou Shaw
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第6期
- Hybrid Structure Tubular;
- Heat Pipe;
- Copper tube;
- LED;
68.Development of a Topic-oriented Document Model based on Systems Thinking: An Application Example for Inventive Theory TRIZ

机译：基于系统思维的面向主题的文档模型开发：发明理论TRIZ的一个应用实例
- 作者：Chao-Chi Chan;Shuen-Ren Yu;Chun-Wen Wang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第1期
- Systems Thinking;
- Five Elements theory;
- Topic Maps;
- TRIZ;
- Engineering Design and Manufacturing;
69.The Parallel Control of Motion Control and Energy-Saving Control for Electro-Hydraulic Servo Systems Using Genetic Algorithm Based Loop-Shaping H_∞ Control

机译：基于遗传算法的回路整形H_∞控制的电液伺服系统运动控制与节能控制并行控制
- 作者：Mao-Hsiung Chiang;Yih-Nan Chen;Lian-Wang Lee
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第4期
- H_∞ control;
- Genetic algorithm;
- Weighting function;
- Electro-hydraulic servo system;
- Parallel control;
- Path control;
- Velocity control;
- Energy-saving control;
70.Performance Improvement Analyses for a Cleanroom in MEMS Laboratory

机译：MEMS实验室洁净室的性能改进分析
- 作者：Fu-Jen Wang;Chi-Ming Lai;Yuan-Hong Luo;Zhuan-Ru Liu;Yin-Rui Zheng
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第2期
- Cleanroom;
- Performance improvement;
- CFD;
- Field measurement;
71.An Optimal Design of Target Tracker by α-β-γ-δ Filter with Genetic Algorithm

机译：基于遗传算法的α-β-γ-δ滤波器对目标跟踪器的优化设计。
- 作者：Chun-Mu Wu;Ching-Kao Chang;Tung-Te Chu
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第6期
- Target tracker;
- Genetic algorithm;
- α-β-γ-δ filter;
- GA-based α-β-γ-δ filter;
72.The Design and Fabrication of a Disc Type Direct Methanol Fuel Cell

机译：盘式直接甲醇燃料电池的设计与制造
- 作者：Yean-Der Kuan;Shah-Rong Lee;Chao-Chang Chen;Chen-Yu Hsieh
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第5期
- DMFC;
- Fuel Cell;
- Disc;
- Bipolar Plate;
73.Identification of System Parameters for Ball End Milling

机译：球头立铣刀系统参数的识别
- 作者：Ting-Nung Shiau;Kuan-Hung Chen;Jer-Rong Chang;M. H. Huang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第2期
- Identification;
- System parameters;
- Cutting parameters;
- Ball end milling;
74.FFT-Tuned Phase-Locked Loop for Vortex Shedding Signal

机译：FFT调谐的锁相环，用于涡旋脱落信号
- 作者：Chih-Chung Hu
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第6期
- Vortex shedding signal;
- Smoothed frequency spectrum;
- Phase-locked loop;
75.Mathematical Model and Tooth Undercutting of Curvilinear Gears with Circular-Arc tooth Profiles

机译：圆弧齿形曲线齿轮的数学模型和齿蚀
- 作者：Yi-Cheng Wu;Kuan-Yu Chen;Chung-Biau Tsay;Jie-Shing Lo
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第3期
- Mathematical model;
- Tooth undercutting;
- Curvilinear gear;
- Circular-arc tooth profile;
76.Robust Exponential Stability Analysis and Controller Design of Continuous-time Structured Uncertain Systems

机译：连续结构不确定系统的鲁棒指数稳定性分析和控制器设计
- 作者：Shyi-Kae Yang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第4期
- Exponential stability;
- Linear matrix inequality;
- Robust controller design;
- Structured uncertainty;
77.Characteristics Analysis of Total Pressure Control Valve for Pump-Controlled Hydraulic System of Airborne Control Surfaces Actuation

机译：机载操纵面致动泵控液压系统总压控制阀的特性分析
- 作者：Yunhua Li;Yan Lang;Haitao Qi;Qi Zheng
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第6期
- Total pressure control valve;
- Pump-controlled system;
- Steady-state characteristic;
- Dynamic characteristic;
78.Comparison of Heat Transfer Coefficient in the Backward-Facing Step Flow with the LBM and Field Synergy Principle

机译：LBM和场协同原理对后向步进流传热系数的比较
- 作者：Tzu-Hsiang Yen;Jenn-Kun Kuo;Yue-Tzu Yang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第2期
- Lattice Boltzmann method;
- Backward-facing step;
- Heat transfer;
- Field synergy principle;
79.Shape-From-Focus 3D measurement with image alignment

机译：具有图像对齐功能的焦点成型3D测量
- 作者：Shih-Chieh Lin;Shih-Shun Chang;Chih-Hsiang Chan
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第1期
- Shape-From-Focus;
- 3D measurement;
80.Effects of Non-Newtonian Couple Stresses on the Dynamic Characteristics of Wide Parabolic-shaped Slider Bearings

机译：非牛顿耦合应力对宽抛物线形滑动轴承动态特性的影响
- 作者：Jaw-Ren Lin
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第1期
- Dynamic characteristics;
- Slider bearings;
- Parabolic-shaped film;
- Couple stresses;
- Micro-continuum theory;
81.Measurement of Human Endothelial Cell Adhesion Using Dielectrophoresis

机译：介电电泳法测定人内皮细胞粘附
- 作者：Min-Sheng Hung;Yu-Wei Chen;Chao-Jie Lin;Chyung Ay;Chin-Ping Chiou
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第5期
- Cell adhesion force;
- Endothelial cell;
- Dielectrophoresis;
82.Observer-based Adaptive Control for Uncertain Nonlinear Systems

机译：不确定非线性系统基于观测器的自适应控制
- 作者：Kuo-Ming Chang;Yung-Tien Liu
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第4期
- State observer;
- Nonlinear input;
- Adaptive control;
- Sector-like bounded;
83.Application of the hybrid Laplace Adomian decomposition method to the nonlinear oscillatory systems

机译：混合Laplace Adomian分解法在非线性振动系统中的应用。
- 作者：Pa-Yee Tsai;Chao-Kuang Chen
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第6期
- Adomian decomposition method;
- Laplace transformation;
- Pade approximant;
- Oscillatory system;
84.A H{sub}∞ Tracking-Based Adaptive Sliding-Mode Controller for Nonlinear Pneumatic Path Tracking Systems via a Functional Approximation Approach

机译：基于H {sub}∞跟踪的非线性气动路径跟踪的自适应滑模控制器的功能逼近方法
- 作者：Mao-Hsiung Chiang;Lian-Wang Lee;Chung-Feng Jeffrey Kuo;Yih-Nan Chen
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第2期
85.Performance Testing of Loop Heat Pipes with Vapor Chamber in the Evaporator

机译：蒸发器中带有蒸气室的环形热管的性能测试
- 作者：Chin-Shu Wang;Ying-Chih Wang;Shah-Rong Lee
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第5期
- Loop heat pipes (LHP);
- Vapor chamber (VC);
- Evaporator;
86.Effect of thermophoresis on mass transfer from a mixed convection flow along a vertical permeable surface with a variable surface heat flux

机译：热泳对具有可变表面热通量的混合对流沿垂直渗透面的传质的影响
- 作者：Ruey-Yih Tsai;Jian-Sheng Huang;Kuei-Hsun Huang;Chun-Hao Huang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第4期
- Thermophoresis;
- Suction/injection;
- Mixed convection;
- Non-Darcian porous medium;
87.Mura Defect Detection using Discrete Wavelet transform

机译：使用离散小波变换的Mura缺陷检测
- 作者：Shang-Liang Chen;Shang-Ta Chou
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第1期
- Mura;
- TFT-LCD;
- Wavelet;
- DCT Defect Detection;
88.Nanocutting Force Investigation of Single Atom with the Defectless Single Crystal in the Cutting Direction [100] and on the Orientation (001) of Cu and Ni Materials

机译：无缺陷单晶在切割方向[100]和Cu和Ni材料的取向（001）上的单原子纳米切割力研究
- 作者：Zone-Ching Lin;Wei-Fu Huang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第4期
- Nanocutting;
- Two-dimension three-atom removal model;
- Cutting force;
89.A Novel Energy-Efficient Adaptive Routing Protocol for Wireless Sensor Network

机译：无线传感器网络的一种新型节能自适应路由协议
- 作者：Chia-Pang Chen;Cheng-Long Chuang;Chwan-Lu Tseng;En-Cheng Yang;Maw-Yang Liu;Joe-Air Jiang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第1期
- Wireless sensor network;
- Energy-efficient;
- Routing algorithm;
90.Study on the Influence of Process Parameters of Large T-Shape Tube Hydroforming with Finite Element Method

机译：有限元法研究大型T形管液压成形工艺参数的影响
- 作者：Wen-Chung Lee;Chin-Tarn Kwan
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第6期
- Finite element simulation;
- T-shape tube;
- Tube hydroforming;
91.Simulation and experimental measurement of flow field within an air cleaner of all-terrain vehicle

机译：全地形车空气滤清器内流场的仿真与实验测量
- 作者：Li-Ming Chu;Min-Hsing Chang;Jiann- Lin Chen;Jin-Yuan Lai
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第2期
- Air cleaner;
- All terrain vehicle;
- Filter;
- CFD;
92.Fire Growth in an ISO 9705 Room with Different Wall Linings

机译：具有不同墙衬的ISO 9705房间内的火灾增长
- 作者：Ming-Ju Tsai;Hung-Chi Su;Pang-An Hsiao;Ching-Yuan Lin;Ming-Chin Ho
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第1期
- Fire Growth;
- Surface Linings;
- Flashover;
- Heat Release Rate;
93.Measurement Principle Analysis and CAA Technology of the Intelligent Articulated CMM

机译：智能铰接式三坐标测量机的测量原理分析和CAA技术
- 作者：Shen-Wang Lin;Chao-Kuang Chen
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第1期
- Articulated arm coordinate measuring machine;
- Non-orthogonal;
- Error correction;
- Parameters identification;
94.Research on Pressure Loss of Alumina Nanofluid Flow in a Pipe

机译：管道中氧化铝纳米流体流动的压力损失研究
- 作者：Ching-Song Jwo;Tun-Ping Teng;Dong-Jin Wu;Ho Chang;Sih-Li Chen
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第6期
- Nanofluid;
- Laminar flow;
- Turbulent flow;
- Pressure drop;
95.Hall Effect on the Heat and Mass Transfer with MHD Natural Convection from a Vertical Plate in Porous Medium

机译：多孔介质中垂直板的MHD自然对流对传热和传质的霍尔效应
- 作者：Jiin-Yuh Jang;Chung-Ting Hsu
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第5期
- MHD;
- Hall effect;
- Porous medium;
- Heat and mass transfer;
96.Dynamic Modeling of a Wind Hydrogen System

机译：氢气系统的动态建模
- 作者：Jenn-Jiang Hwang
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第3期
- Windpower;
- Electrolyzer;
- Hydrogen Energy;
97.Image Processor and Fuzzy PID Controller Design for Robot-Car Intercept Mission

机译：机器人汽车拦截任务的图像处理器和模糊PID控制器设计
- 作者：Yiing-Yuh Lin;Ming-Young Liao
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第5期
- Robot-car;
- Real-time image processor;
- Wireless transmission;
- Fuzzy PID control;
98.Dynamic Behaviors Analysis of the Aerostatic Linear Guideway with a Passive Compensator for PCB Drilling Machine

机译：带有PCB钻孔机被动补偿器的静态直线导轨动力学行为分析。
- 作者：Ming-Fei Chen;Wei-Lun Huang;Wen-Tse Hsiao
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第2期
99.A Simulative Measuring Model of Scanning Near-Field Optical Microscope by Applying Aluminum Atoms of FCC Structure for The Nano-Scale Standard Sample and The Qualitative Analysis

机译：应用FCC结构铝原子对纳米尺度标准样品进行扫描近场光学显微镜模拟测量模型及定性分析
- 作者：Zone-Ching Lin;Ming-Ho Chou
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第1期
- Near field scanning optical microscope (SNOM);
- Morse potential;
- Measuring model;
- Edge effect;
100.Configuration Transformations of Mechanisms with Variable Topologies

机译：具有可变拓扑的机制的配置转换
- 作者：Chen-Hsiung Kang;Hong-Sen Yan
- 期刊名称：《Journal of the Chinese Society of Mechanical Engineers, Series C: Transactions of the Chinese Society of Mechanical Engineers》 | 2009年第4期
- Mechanisms with variable topologies;
- Variable joints;
- Mapping functions;
- Configuration transformations;

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有出版物经营许可证

客服微信
服务号