首页> 外文OA文献 >Quantitative imaging of a non-combusting diesel spray using structured laser illumination planar imaging
【2h】

Quantitative imaging of a non-combusting diesel spray using structured laser illumination planar imaging

机译:使用结构化激光照明平面成像的非燃烧柴油喷雾的定量成像

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Due to its transient nature, high atomization process, and rapid generation of fine evaporating droplets, diesel sprays have been, and still remain, one of the most challenging sprays to be fully analyzed and understood by means of non-intrusive diagnostics. The main limitation of laser techniques for quantitative measurements of diesel sprays concerns the detection of the multiple light scattering resulting from the high optical density of such a scattering medium. A second limitation is the extinction of the incident laser radiation as it crosses the spray, as well as the attenuation of the signal which is to be detected. All these issues have strongly motivated, during the past decade, the use of X-ray instead of visible light for dense spray diagnostics. However, we demonstrate in this paper that based on an affordable Nd:YAG laser system, structured laser illumination planar imaging (SLIPI) can provide accurate quantitative description of a non-reacting diesel spray injected at 1,100 bar within a room temperature vessel pressurized at 18.6 bar. The technique is used at lambda = 355 nm excitation wavelength with 1.0 mol% TMPD dye concentration, for simultaneous LIF/Mie imaging. Furthermore, a novel dual-SLIPI configuration is tested with Mie scattering detection only. The results confirm that a mapping of both the droplet Sauter mean diameter and extinction coefficient can be obtained by such complementary approaches. These new insights are provided in this article at late times after injection start. It is demonstrated that the application of SLIPI to diesel sprays provides valuable quantitative information which was not previously accessible.
机译:由于其瞬态性质,高雾化过程和快速产生的精细蒸发液滴,柴油喷雾已经存在,并且仍然存在,通过非侵入式诊断方法充分分析和理解最具挑战性的喷雾剂之一。激光技术的主要限制用于柴油喷雾的定量测量值涉及由这种散射介质的高光密度产生的多光散射的检测。第二个限制是由于其交叉喷雾而引入激光辐射的灭射,以及待检测的信号的衰减。所有这些问题都强烈激励,在过去十年中,使用X射线而不是可见光进行致密喷涂诊断。然而,我们在本文中证明,基于实惠的Nd:YAG激光系统,结构化激光照明平面成像(Slipi)可以提供精确的定量描述在18.6的室温容器内注入1,100杆的非反应柴油喷雾剂的准确定量描述酒吧。该技术用于Lambda = 355nm激发波长,具有1.0mol%TMPD染料浓度,用于同时LiF / MIE成像。此外,仅使用MIE散射检测来测试新的双滑动配置。结果证实,通过这种互补方法可以获得液滴制冷器平均直径和消光系数的映射。本文在注入后的迟到时间内提供了这些新见解。据证明,Slipi对柴油喷雾的应用提供了无价值的定量信息。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号