首页> 外文期刊>Semiconductors >Formation and study of buried SiC layers with a high content of radiation defects
【24h】

Formation and study of buried SiC layers with a high content of radiation defects

机译:高辐射缺陷含量的SiC埋层的形成与研究

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Protons with energy E = 100 keV were implanted with doses ranging from 2 x 10(17) to 4 x 10(17) cm(-2) into 6H- and 4H-SiC n-type samples at room temperature. The samples were subjected to various types of postimplantation heat treatment in the temperature range 550-1500degreesC. The parameters of the samples were studied by measuring the capacitance-voltage and current-voltage characteristics and by analyzing the photoluminescence spectra. Blistering on the surface of the sample is observed after annealing the samples at a temperature of 800degreesC only after implantation of protons with a dose of less than or equal to3 x 10(17) cm(-2). A decrease in the resistivity of the compensated layer sets in after annealing at a temperature of similar to1200degreesC and is completed after annealing at a temperature of similar to1500degreesC. A drastic decrease in the photoluminescence intensity is observed after implantation for all types of samples. Recovery of the photoluminescence intensity sets in after annealing at temperatures greater than or equal to800degreesC and is complete after annealing at a temperature of 1500degreesC. (C) 2004 MAIK "Nauka/Interperiodica".
机译:在室温下,将能量为E = 100 keV的质子以2 x 10(17)到4 x 10(17)cm(-2)的剂量注入到6H-和4H-SiC n型样品中。在550-1500℃的温度范围内对样品进行各种类型的植入后热处理。通过测量电容-电压和电流-电压特性并分析光致发光光谱来研究样品的参数。仅在植入质子剂量小于或等于3 x 10(17)cm(-2)的质子后,在800摄氏度的温度下对样品进行退火后,才能观察到样品表面起泡。补偿层的电阻率的降低在相似于1200℃的温度下退火之后开始,并且在相似于1500℃的温度下退火之后完成。对于所有类型的样品,在植入之后都观察到光致发光强度的急剧下降。光致发光强度的恢复在大于或等于800℃的温度下退火后确定,并且在1500℃的温度下退火后完成。 (C)2004 MAIK“ Nauka / Interperiodica”。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号