首页> 外文期刊>CERAMICS INTERNATIONAL >Fabrication of high infrared reflective ceramic films on polyester fabrics by RF magnetron sputtering
【24h】

Fabrication of high infrared reflective ceramic films on polyester fabrics by RF magnetron sputtering

机译:射频磁控溅射在聚酯织物上制备高红外反射陶瓷膜

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

In this project, AZO/Ag/AZO and AZO/Cu/AZO multilayer films were deposited on polyester fabrics with radio frequency (RF) magnetron sputtering technology. The prepared samples were systematically investigated with X-ray diffraction (XRD), Scanning Electron Microscope (SEM) and Fourier Transform Infrared Spectroscopy. Physical properties of the coated fabrics were evaluated by infrared reflection rate, contact angle (CA), air permeability and UPF value. The results indicated that the AZO/Ag/AZO coated polyester fabrics presented a high infrared reflection rate of 95-96% and CA of about 92.5 degrees/93.5 degrees, air permeability of 17.1/15.4 ml/s/cm(2) at 100 Pa and UPF values of 40.64/46.67. The AZO/Cu/AZO coated polyester fabrics exhibited an infrared reflection rate of 50-60%, CA of about 88 degrees/88.5 degrees, air permeability of 18.1/ 17.5 ml/s/cm(2) at 100 Pa and UPF values of 41.96/48.437. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
机译:在该项目中,采用射频(RF)磁控溅射技术将AZO / Ag / AZO和AZO / Cu / AZO多层膜沉积在聚酯织物上。用X射线衍射(XRD),扫描电子显微镜(SEM)和傅里叶变换红外光谱对系统制备的样品进行了系统研究。通过红外反射率,接触角(CA),透气性和UPF值评估涂层织物的物理性能。结果表明,AZO / Ag / AZO涂层聚酯织物在100的红外反射率高达95-96%,CA约为92.5度/93.5度,透气度为17.1 / 15.4 ml / s / cm(2) Pa和UPF值为40.64 / 46.67。涂有AZO / Cu / AZO的聚酯织物在100 Pa下的UPF值为50-60%,CA约为88度/88.5度,透气度为18.1 / 17.5 ml / s / cm(2)。 41.96 / 48.437。 (C)2014 Elsevier Ltd和Techna Group S.r.l.版权所有。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号