首页> 外文期刊>Medical Physics >Stereotactic mammography imaging combined with 3D US imaging for image guided breast biopsy.
【24h】

Stereotactic mammography imaging combined with 3D US imaging for image guided breast biopsy.

机译:立体定向乳腺摄影与3D US成像相结合,可进行图像引导的乳房活检。

获取原文
获取原文并翻译 | 示例
           

摘要

Stereotactic X-ray mammography (SM) and ultrasound (US) guidance are both commonly used for breast biopsy. While SM provides three-dimensional (3D) targeting information and US provides real-time guidance, both have limitations. SM is a long and uncomfortable procedure and the US guided procedure is inherently two dimensional (2D), requiring a skilled physician for both safety and accuracy. The authors developed a 3D US-guided biopsy system to be integrated with, and to supplement SM imaging. Their goal is to be able to biopsy a larger percentage of suspicious masses using US, by clarifying ambiguous structures with SM imaging. Features from SM and US guided biopsy were combined, including breast stabilization, a confined needle trajectory, and dual modality imaging. The 3D US guided biopsy system uses a 7.5 MHz breast probe and is mounted on an upright SM machine for preprocedural imaging. Intraprocedural targeting and guidance was achieved with real-time 2D and near real-time 3D US imaging. Postbiopsy 3D US imaging allowed for confirmation that the needle was penetrating the target. The authors evaluated 3D US-guided biopsy accuracy of their system using test phantoms. To use mammographic imaging information, they registered the SM and 3D US coordinate systems. The 3D positions of targets identified in the SM images were determined with a target localization error (TLE) of 0.49 mm. The z component (x-ray tube to image) of the TLE dominated with a TLEz of 0.47 mm. The SM system was then registered to 3D US, with a fiducial registration error (FRE) and target registration error (TRE) of 0.82 and 0.92 mm, respectively. Analysis of the FRE and TRE components showed that these errors were dominated by inaccuracies in the z component with a FREz of 0.76 mm and a TREz of 0.85 mm. A stereotactic mammography and 3D US guided breast biopsy system should include breast compression for stability and safety and dual modality imaging for target localization. The system will provide preprocedural x-ray mammography information in the form of SM imaging along with real-time US imaging for needle guidance to a target. 3D US imaging will also be available for targeting, guidance, and biopsy verification immediately postbiopsy.
机译:立体定向X线乳房X线照相术(SM)和超声(US)引导都常用于乳腺活检。尽管SM提供了三维(3D)定位信息,而US提供了实时指导,但两者都有局限性。 SM是一个漫长而令人不适的过程,而美国指导的过程本质上是二维(2D),因此需要安全和准确的熟练医师。作者开发了3D US引导的活检系统,可与SM成像相集成并对其进行补充。他们的目标是通过使用SM成像弄清模糊的结构,从而能够使用US对可疑肿块进行更大的活检。 SM和US引导下的活检的特征相结合,包括乳房稳定,受限的针头轨迹和双模式成像。 3D US引导的活检系统使用7.5 MHz乳房探针,并安装在立式SM机器上以进行术前成像。通过实时2D和近实时3D US成像实现了过程内目标和指导。活检后3D US成像可确认针头正在刺入目标。作者使用测试体模评估了其系统的3D US引导的活检准确性。为了使用乳腺X线摄影信息,他们注册了SM和3D US坐标系。确定的SM图像中目标的3D位置的目标定位误差(TLE)为0.49 mm。 TLE的z分量(从X射线管到图像的图像)以0.47 mm的TLEz为主。然后将SM系统配准到3D US,基准配准误差(FRE)和目标配准误差(TRE)分别为0.82和0.92 mm。对FRE和TRE分量的分析表明,这些误差主要由z分量的不精确度决定,FREz为0.76 mm,TREz为0.85 mm。立体定向乳腺摄影和3D US引导的乳房活检系统应包括乳房压迫以确保稳定性和安全性,以及双模态成像以进行目标定位。该系统将以SM成像和实时US成像的形式提供SM成像前的X线乳房X线摄影信息,以将针引导到目标。 3D US成像还将在活检后立即用于靶向,指导和活检验证。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号