首页> 外文期刊>Journal of Micromechanics and Microengineering >Design, fabrication and testing of a micromachined integrated tunable microlens
【24h】

Design, fabrication and testing of a micromachined integrated tunable microlens

机译:微机械集成可调微透镜的设计,制造和测试

获取原文
获取原文并翻译 | 示例
       

摘要

An integrated tunable microlens chip capable of adjusting its focal length over a wide range without any mechanical driving parts is reported in this paper. The packaged microlens chip consists of a flexible polymer lens, a fluidic chamber, a thermal actuator and a sensor. The focal length change is controlled by varying the voltage applied to the thermal actuator. The focal length can be changed from 14.658 mm to 2.782 mm, which corresponds to the change of numerical aperture from 0.078 to 0.412. The tunable microlens chip is a critical device to increase the efficiency of the image capture and the light detection in optical or biophotonic applications. Potential applications include camera phones, surveillance cameras, disk recording systems, collimators, optical sensing systems, confocal imaging systems and optical communications.
机译:本文报道了一种集成的可调微透镜芯片,该芯片能够在很宽的范围内调节焦距,而无需任何机械驱动部件。封装的微透镜芯片由柔性聚合物透镜,射流室,热致动器和传感器组成。通过改变施加到热致动器的电压来控制焦距变化。焦距可以从14.658毫米更改为2.782毫米,这对应于数值孔径从0.078更改为0.412。可调谐微透镜芯片是提高光学或生物光子应用中图像捕获和光检测效率的关键设备。潜在的应用包括照相电话,监视摄像机,磁盘记录系统,准直仪,光学传感系统,共焦成像系统和光学通信。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号