首页> 外文期刊>Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites >Application of metal induced unilaterally crystallized polycrystalline silicon thin-film transistor technology to system-on-glass display
【24h】

Application of metal induced unilaterally crystallized polycrystalline silicon thin-film transistor technology to system-on-glass display

机译:金属诱导的单晶结晶多晶硅薄膜晶体管技术在玻璃系统显示中的应用

获取原文
获取原文并翻译 | 示例
           

摘要

Based on MIUC technology, high-performance poly-Si TFT row scanning and column driving circuits were fabricated. The starting operating voltage of row scanning circuit is 3.5 V. Under an operating voltage of 5 V and a loading capacitance of 22 pf, the falling edge is 150 ns, the rising edge is 205 ns and the maximum operating frequency is higher than I MHz. For MIUC poly-Si TFT column driving circuit, the starting operating voltage is 3.5 V. Under an operating voltage of 5 V and a loading capacitance of 22 pf, the rising edge is 200 ns and the signal fading rate is 15% during a frame period of 64 mu s. Parallel transfer is used for the RGB signals, achieving a highest operating frequency of 4 MHz. Using these row scanning and column driving circuits, a simple 80 x RGB x 60 AMLCD display system on glass substrate was made and demonstrated good video display effect. (c) 2006 Elsevier B.V. All rights reserved.
机译:基于MIUC技术,制造了高性能多晶硅TFT行扫描和列驱动电路。行扫描电路的起始工作电压为3.5V。在5 V的工作电压和22 pf的负载电容下,下降沿为150 ns,上升沿为205 ns,最大工作频率高于I MHz 。对于MIUC多晶硅TFT列驱动电路,起始工作电压为3.5V。在5 V的工作电压和22 pf的负载电容下,在一帧期间的上升沿为200 ns,信号衰减率为15%周期为64 s。并行传输用于RGB信号,实现最高4 MHz的工作频率。使用这些行扫描和列驱动电路,在玻璃基板上制作了一个简单的80 x RGB x 60 AMLCD显示系统,并显示出良好的视频显示效果。 (c)2006 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号