...
首页> 外文期刊>Journal of Electroanalytical Chemistry: An International Journal Devoted to All Aspects of Electrode Kinetics, Interfacial Structure, Properties of Electrolytes, Colloid and Biological Electrochemistry >Structural, optical and electrical properties of electrodeposited cadmium selenide thin films for applications in photodetector and photoelectrochemical cell
【24h】

Structural, optical and electrical properties of electrodeposited cadmium selenide thin films for applications in photodetector and photoelectrochemical cell

机译:电沉积硒化镉薄膜的结构,光学和电学性质,用于光电探测器和光电化学电池

获取原文
获取原文并翻译 | 示例
           

摘要

Nanocrystalline cadmium selenide (CdSe) thin films have been deposited on indium tin oxide (ITO) coated glass substrates at room temperature (28 degrees C) by using simple two electrode electrodeposition process. The preparative parameters such as deposition time, deposition potential, concentration of solution, pH value of electrolyte have been optimized for deposition of uniform CdSe thin films. The films were annealed at 250 degrees C for 30 min in air and characterized using X-ray diffraction, optical absorption spectrophotometer, Scanning Electron Microscope, Current-Voltage-Temperature measurements, photoconductivity and photoelectrochemical cell (PEC) measurements. XRD studies identify that the hexagonal (Wurtzite) phase present in the deposited CdSe thin films is highly oriented to [002] direction. Optical band gap is found to decrease with increase in annealing temperature. Electrical properties exhibit that the films are semiconducting. Photoresponse of the films increases with increase of exposure time. The construction of fabricated photoelectrochemical cell is CdSe vertical bar NaOH (1 M) + S (1 M) + Na2S (1 M)I Graphite. The cell shows that the CdSe thin films have two different zones of metallic character under both dark and illumination conditions and their conversion efficiency is 1.16%. (C) 2015 Elsevier B.V. All rights reserved.
机译:纳米晶硒化镉(CdSe)薄膜已通过使用简单的两电极电沉积工艺在室温(28摄氏度)下沉积在涂有铟锡氧化物(ITO)的玻璃基板上。制备参数,例如沉积时间,沉积电位,溶液浓度,电解质的pH值已经过优化,可以沉积均匀的CdSe薄膜。将膜在空气中在250摄氏度下退火30分钟,并使用X射线衍射,光学吸收分光光度计,扫描电子显微镜,电流-电压-温度测量,光电导和光电化学电池(PEC)测量进行表征。 XRD研究表明,沉积的CdSe薄膜中存在的六方(纤锌矿)相高度取向于[002]方向。发现光带隙随着退火温度的升高而减小。电性能表明该膜是半导体的。薄膜的光响应随着曝光时间的增加而增加。制成的光电化学电池的结构为CdSe垂直棒NaOH(1 M)+ S(1 M)+ Na2S(1 M)I石墨。电池显示,CdSe薄膜在黑暗和光照条件下都具有两个不同的金属特征区域,其转换效率为1.16%。 (C)2015 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号