首页> 外文期刊>Mechanical systems and signal processing >Control of second-order asymmetric systems with time delay: Smith predictor approach
【24h】

Control of second-order asymmetric systems with time delay: Smith predictor approach

机译:具有时滞的二阶非对称系统的控制:Smith预估器方法

获取原文
获取原文并翻译 | 示例

摘要

The feedback control for systems modeled as second-order linear dynamics with time delays is a challenge that received crescent attention nowadays. Flexible structures and structural systems are some remarkable examples that can be modeled as second-order dynamics. In the presence of delays, the well-known pole/eigenvalue assignment may fail due to the infinite-dimensional nature of the characteristic polynomials: the dominant eigenvalues can be erroneously placed in positions near to the imaginary axis, or even in unstable locations, that is, in the right-half plane. Recently, the authors have proposed a receptance-based delay compensation strategy that merges remarkable properties of receptance description and Filtered Smith Predictor (FSP). The obtained results outperformed pure pole/eigenvalue assignment techniques since the undesired delay effect is removed from the nominal characteristic equation. Hence, standard design strategies can be directly applied to control second-order systems with time delay based on a receptance model with no delay. In this work, these results are extended to deal with unstable second-order systems, an issue widespread in aeroelastic or friction-induced vibration systems. The FSP structure design is carried out in the discretized models of the system receptance to ensure internal stability as a consequence of particular filter design and implementation strategy. This procedure is possible due to a stable implementation structure for the receptance-based predictor in its digital form. Two typical examples, namely, aeroelastic flutter control and friction-induced vibration control, are used as benchmarks to verify the efficacy of the proposal.
机译:建模为具有时滞的二阶线性动力学的系统的反馈控制是当今受到新月关注的挑战。柔性结构和结构系统是一些非凡的示例,可以将其建模为二阶动力学。在存在延迟的情况下,众所周知的极点/特征值分配可能会由于特征多项式的无限维性质而失败:主要特征值可能会错误地放置在靠近虚轴的位置,甚至在不稳定的位置,在右半平面。最近,作者提出了一种基于接收的延迟补偿策略,该策略融合了接收描述和Filtered Smith Predictor(FSP)的显着特性。由于从标称特性方程中消除了不希望的延迟效应,因此获得的结果优于纯极/特征值分配技术。因此,基于无延迟的接受模型,标准设计策略可以直接应用于具有时间延迟的二阶系统控制。在这项工作中,这些结果扩展到处理不稳定的二阶系统,这是在气动弹性或摩擦引起的振动系统中普遍存在的问题。 FSP结构设计是在系统接受度的离散模型中进行的,以确保由于特定的滤波器设计和实施策略而导致的内部稳定性。由于以数字形式的基于接受度的预测变量的稳定实现结构,因此该过程成为可能。以两个典型的例子,即气动弹性颤振控制和摩擦引起的振动控制为基准,以验证该建议的有效性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号