A Highly Efficient Small-Displacement Marine Two-Stroke H2DI Engine With Low Emissions

摘要

A hydrogen-fueled two-stroke prototype demonstrator based on a 9.9 hp (7.4 kW) production gasoline marine outboard engine is presented, which, while matching the original engine's rated power output on hydrogen, achieves a best-point gross indicated thermal efficiency (ITE) of 42.4％ at the ICOMIA mode 4 operating point, corresponding to 80％ and 71.6％ of the rated engine speed and torque, respectively. The brake thermal efficiency (BTE) at the rated power is 32.3％. Preliminary exhaust gas measurements suggest that the engine could also meet the most stringent CARB 5-Star marine spark-ignition emission standards limiting HC+NO_x emissions to 2.5g/kWh without any after-treatment. These are realized in a cost-effective concept around a proven two-stroke base engine and a low-pressure direct-injected gaseous hydrogen (LPDI GH2) system, which employs no additional fuel pump and is uniquely adapted from volume production components. Later fuel injection is found to improve thermal efficiency at the expense of increased NO_x emissions and, at the extreme, increased cyclic variation. These observations are hypothesized and supported by phenomenological inferences of the observed trends of combustion duration, NO_x concentration, and indicated mean effective pressure (IMEP) variance to be due to increasing charge stratification with the later timings. This work outlines the pathway-including investigations of several fuel delivery strategies with limited success-leading to the current status, including design, modeling with GT-POWER, delivery of lube oil, lubrication issues using hydrogen, and calibration sweeps. The experimental results comprising steady-state dynamometer performance, cylinder pressure traces, NO_x emission measurements, along with heat release analyses, support the reported numbers and the key finding that late fuel injection timing and charge stratification drive the high efficiencies and the NO_x trade-off; this is discussed and forms the basis for future work.