首页> 外文期刊>Japanese journal of applied physics >Crystalline quality distributions of the type IIa diamond substrate and the CVD diamond layer processed by chemical mechanical polishing using a SiO_2 wheel
【24h】

Crystalline quality distributions of the type IIa diamond substrate and the CVD diamond layer processed by chemical mechanical polishing using a SiO_2 wheel

机译:使用SiO_2轮通过化学机械抛光处理的IIa型金刚石基底和CVD金刚石层的晶体质量分布

获取原文
获取原文并翻译 | 示例

摘要

We have grown a high-quality type-Ha single-crystal diamond substrate, which had a large (001) growth sector with a dislocation-free area of 3.5 x 3.5 mm(2), and strong free exciton (FE) emissions were observed by cathodoluminescence (CL), while dislocations, stacking faults, and defect-related CL emissions at 340 and 400 nm were observed in the (111) growth sector. After CVD growth on the off-angled type-Ila substrate processed by SiO2 chemical mechanical polishing, the intensity of the FE emission became 3 times higher and the electronic quality became more homogeneous, indicating that a high-quality CVD layer was successfully grown and the lateral growth eliminated the evolution of point defects in the substrate. On the other hand, the CVD layer on the (111) growth sector had hillocks and defect-related CL emissions, indicating that the stacking faults have a highly negative effect on the electronic quality of the CVD layer compared with the dislocations. (C) 2018 The Japan Society of Applied Physics
机译:我们已经生长了高质量的Ha型单晶金刚石基底,该基底具有较大的(001)生长区,无位错面积为3.5 x 3.5 mm(2),并且观察到了强烈的自由激子(FE)发射通过阴极发光(CL),在(111)生长区中观察到了在340和400 nm处的位错,堆垛层错和与缺陷相关的CL发射。在通过SiO2化学机械抛光处理的斜角Ila衬底上进行CVD生长后,FE发射强度变得更高3倍,电子质量变得更加均匀,表明成功地生长了高质量的CVD层并且横向生长消除了衬底中点缺陷的发展。另一方面,在(111)生长区的CVD层有小丘和与缺陷有关的CL发射,这表明与位错相比,堆垛层错对CVD层的电子质量有很大的负面影响。 (C)2018日本应用物理学会

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号