...
首页> 外文期刊>IEEE Transactions on Robotics >Model Predictive Control for Transparent Teleoperation Under Communication Time Delay
【24h】

Model Predictive Control for Transparent Teleoperation Under Communication Time Delay

机译:通信时延下透明遥操作的模型预测控制

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Prior efforts in bilateral teleoperation under communication delay have mainly yielded control algorithms that sacrifice performance in order to guarantee robust stability. In contrast, this paper proposes a multimodel predictive controller that can enhance the teleoperation transparency in the presence of a known constant delay. Separate controllers are designed for free motion/soft contact and contact with rigid environments, with switching between these mode-based control laws occurring according to the identified contact mode. Performance objectives such as position tracking and tool impedance shaping for free motion/soft contact, as well as position and force tracking for contact with rigid environments, are incorporated into a multi-input/multi-output state-space representation of the system dynamics. New Artstein-type state and measurement transformations are proposed to generate delay-free dynamics suitable for output-feedback control, based on the original dynamics with delays in various input and output channels. The application of the continuous-time linear quadratic Gaussian control synthesis to the resulting mode-based delay-free dynamics yields control laws that guarantee closed-loop stability and enhanced performance in each phase of teleoperation. The robustness of the mode-based controllers with respect to parametric uncertainty is analyzed. Experimental results with a single-axis teleoperation setup demonstrate the effectiveness of the proposed approach
机译:在通信延迟下进行双边遥操作的先前努力主要产生了牺牲性能以保证鲁棒稳定性的控制算法。相比之下,本文提出了一种多模型预测控制器,该控制器可以在存在已知恒定延迟的情况下提高远程操作的透明度。独立的控制器设计用于自由运动/软接触以及与刚性环境的接触,并根据识别的接触模式在这些基于模式的控制定律之间进行切换。性能目标,例如用于自由运动/软接触的位置跟踪和工具阻抗整形,以及用于与刚性环境接触的位置和力跟踪,已纳入系统动力学的多输入/多输出状态空间表示中。提出了新的Artstein型状态和测量转换,以基于各种输入和输出通道中具有延迟的原始动态,生成适用于输出反馈控制的无延迟动态。将连续时间线性二次高斯控制综合应用于基于模式的无延迟动力学产生的控制律可确保闭环稳定性和远程操作各个阶段的性能增强。分析了基于模式的控制器相对于参数不确定性的鲁棒性。单轴遥操作装置的实验结果证明了该方法的有效性

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号