首页> 外文期刊>IEEE Transactions on Power Electronics >A 3600 V/80 A Series--Parallel-Connected Silicon Carbide MOSFETs Module With a Single External Gate Driver
【24h】

A 3600 V/80 A Series--Parallel-Connected Silicon Carbide MOSFETs Module With a Single External Gate Driver

机译:具有单个外部栅极驱动器的3600 V / 80 A系列-并联的碳化硅MOSFET模块

获取原文
获取原文并翻译 | 示例

摘要

In this paper, a new series connection topology is introduced for silicon carbide (SiC) MOSFETs. In the topology, with a single external gate drive, three series-connected SiC MOSFETs are synchronously driven. The operating principle of the proposed topology is analyzed and presented. In order to improve the current capability of the module, parallel connection of two SiC devices are also demonstrated. A 3600 V/80 A series–parallel-connected configuration with three rows in a series and two branches in parallel is constructed with six 1200 V/40 A discrete SiC MOSFETs. Switching behavior of the configuration is completed at 2300 V/78 A. Experimental results verify the validity and feasibility of the proposed topology. Analysis based on experimental results for the circuit switching speed and switching losses is given. Finally, such a series–parallel-connected circuit is integrated in a SiC MOSFETs module, capable of 3600 V/80 A. The switching characteristics of the module are compared to the discrete configuration.
机译:本文介绍了一种用于碳化硅(SiC)MOSFET的新型串联连接拓扑。在拓扑中,通过单个外部栅极驱动器,即可同步驱动三个串联连接的SiC MOSFET。分析并提出了所提出的拓扑的工作原理。为了提高模块的电流容量,还演示了两个SiC器件的并联连接。 3600 V / 80 A串联-并联配置,其中三个串联,两个分支并联,由六个1200 V / 40 A离散SiC MOSFET构成。该配置的切换行为在2300 V / 78 A时完成。实验结果验证了所提出拓扑的有效性和可行性。根据实验结果对电路的开关速度和开关损耗进行了分析。最后,这种串联-并联电路被集成在3600 V / 80 A的SiC MOSFET模块中。将该模块的开关特性与分立配置进行了比较。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号