首页> 外文期刊>Engineering Structures >Thermal effect on vibration and buckling analysis of thin isotropic/ orthotropic rectangular plates with crack defects
【24h】

Thermal effect on vibration and buckling analysis of thin isotropic/ orthotropic rectangular plates with crack defects

机译:裂纹缺陷各向同性/正交各向异性矩形薄板振动和屈曲分析的热效应

获取原文
获取原文并翻译 | 示例

摘要

The present research is concerned with the vibration analysis of thin isotropic and orthotropic rectangular plates with crack defects under thermal environmental conditions. In the literature, there are only few studies reported in this direction. Based on the classical plate theory, the governing equations of the isotropic and orthotropic cracked rectangular plates can be derived, in which a surface crack located at the plate center is formulated based on a line-spring model. Since the dynamic behavior of structural elements is significantly affected by thermal effects, a thermal buckling analysis for isotropic and orthotropic plates is also conducted. A uniform heating load on the cracked rectangular plates is considered and the critical buckling temperature of the plates with or without cracks is investigated. The discrete singular convolution (DSC) method is then applied to formulate the eigenvalue equations for the cracked rectangular plates under various thermal conditions. The DSC technique is an ingenious method in stability and dynamic analysis of plates, not only it is a flexible local method to handle complex geometries and boundary conditions, but also it performs as a global approach with a high degree of accuracy. To go beyond the limitation of the DSC method, the use of Taylor’s series expansion method is incorporated for the treatment of free boundary conditions. In addition, this is the first attempt to explore its application on the analysis of cracked rectangular plates under thermal effects. In this work, the vibration of isotropic and orthotropic cracked rectangular plates with various combinations of boundary conditions is studied. A special restrained manner of simply supported conditions that are permissible for in-plane movements is also analyzed. The obtained solutions herein are compared with the existing results to verify the accuracy and reliability. Besides, accurate first-known solutions are also presented.
机译:本研究涉及热环境条件下具有裂纹缺陷的各向同性和正交异性矩形薄板的振动分析。在文献中,只有很少的研究报道了这一方向。基于经典板理论,可以推导各向同性和正交各向异性裂纹矩形板的控制方程,其中,基于线弹簧模型,可以计算出位于板中心的表面裂纹。由于结构元件的动态行为受热效应的显着影响,因此还对各向同性和正交异性板进行了热屈曲分析。考虑了在破裂的矩形板上均匀的加热负荷,并研究了有无裂纹的板的临界屈曲温度。然后应用离散奇异卷积(DSC)方法来计算在各种热条件下裂纹矩形板的特征值方程。 DSC技术是板的稳定性和动态分析的一种巧妙方法,不仅是一种灵活的局部方法,可以处理复杂的几何形状和边界条件,而且还具有很高的准确性。为了超越DSC方法的局限性,使用泰勒级数展开法来处理自由边界条件。另外,这是探索其在热效应下裂纹矩形板分析中的应用的首次尝试。在这项工作中,研究了具有各种边界条件组合的各向同性和各向同性裂纹矩形板的振动。还分析了平面内运动所允许的简单支撑条件的特殊约束方式。将本文中获得的解决方案与现有结果进行比较,以验证准确性和可靠性。此外,还提供了准确的第一个已知的解决方案。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号