首页> 外文期刊>Applied Microbiology >Graphical Procedure for Comparing Thermal Death of Bacillus stearothermophilus Spores in Saturated and Superheated Steam
【24h】

Graphical Procedure for Comparing Thermal Death of Bacillus stearothermophilus Spores in Saturated and Superheated Steam

机译:比较饱和和过热蒸汽中嗜热脂肪芽孢杆菌孢子热死亡的图形程序

获取原文
           

摘要

The thermal death curve of dried spores of Bacillus stearothermophilus in saturated steam was characterized by three phases: (i) a sharp initial rise in viable count; (ii) a low rate of death which gradually increased; and (iii) logarithmic death at maximal rate. The first phase was a reflection of inadequate heat activation of the spore population. The second and third phases represented the characteristic thermal death curve of the spores in saturated steam. A jacketed steam sterilizer, equipped with a system for initial evacuation of the chamber, was examined for superheat during normal operation. Measurements of spore inactivation and temperature revealed superheat in surface layers of fabrics being processed in steam at 121 C. The high temperature of the fabric surfaces was attributed to absorption of excess heat energy from superheated steam. The superheated steam was produced at the beginning of the normal sterilizing cycle by transfer of heat from the steam-heated jacket to saturated steam entering the vessel.
机译:嗜热脂肪芽孢杆菌干燥的孢子在饱和蒸汽中的热死亡曲线具有三个阶段的特征:(i)存活数量急剧增加。 (ii)死亡率逐渐降低; (iii)以最大速率对数死亡。第一阶段是孢子种群热活化不足的反映。第二和第三阶段代表了饱和蒸汽中孢子的特征热死亡曲线。在正常运行过程中,检查了装有夹套的蒸汽灭菌器,该蒸汽灭菌器配有用于腔室初始排空的系统,并且过热。孢子失活和温度的测量结果表明,在121°C的蒸汽中处理的织物表面层过热。织物表面的高温归因于过热蒸汽吸收了过多的热能。过热蒸汽是在正常灭菌周期开始时通过将热量从蒸汽加热夹套传递到进入容器的饱和蒸汽而产生的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号