首页> 外文期刊>Biomedical signal processing and control >Surface EMG based continuous estimation of human lower limb joint angles by using deep belief networks
【24h】

Surface EMG based continuous estimation of human lower limb joint angles by using deep belief networks

机译:基于表面肌电的人下肢关节角度的深度估计连续估计

获取原文
获取原文并翻译 | 示例

摘要

HighlightsHuman lower limb flexion/extension (FE) joint angles are estimated continuously with surface EMG signals.A nonlinear dimensionality reduction method by using DBN is presented for multichannel surface EMG signals.The surface EMG features extracted using DBN method outperform PCA method.BP neural network is used to relate the surface EMG features and the joint angles.AbstractSurface electromyography (EMG) signals have been widely used in locomotion studies and human-machine interface applications. In this paper, a regression model which relates the multichannel surface EMG signals to human lower limb flexion/extension (FE) joint angles is constructed. In the experimental paradigm, three dimensional trajectories of 16 external markers on the human lower limbs were recorded by optical motion capture system and surface EMG signals from 10 muscles directly concerned with the lower limb motion were recorded synchronously. With the raw data, the joint angles of hip, knee and ankle were calculated accurately and the time series of intensity for surface EMG signals were extracted. Then, a deep belief networks (DBN) that consists of restricted Boltzmann machines (RBM) was built, by which the multi-channel processed surface EMG signals were encoded in low dimensional space and the optimal features were extracted. Finally, a back propagation (BP) neural network was used to map the optimal surface EMG features to the FE joint angles. The results show that, the features extracted from multichannel surface EMG signals using DBN method proposed in this paper outperform principal components analysis (PCA), and the root mean square error (RMSE) between the estimated joint angles and calculated ones during human walking is reduced by about 50%. The proposed model is expected to develop human-machine interaction interface to achieve continuous bioelectric control and to improve motion stability between human and machine, especially for lower limb wearable intelligent equipment.
机译: 突出显示 使用表面肌电信号连续估算人类下肢的屈伸(FE)关节角度。 < ce:list-item id =“ lsti0010”> 针对多通道提出了一种使用DBN的非线性降维方法表面肌电信号。 使用DBN方法提取的表面肌电特征优于PCA方法。 BP神经网络用于关联表面EMG特征和关节角度。 摘要 表面肌电(EMG)信号已广泛用于运动研究和人机界面应用中。在本文中,建立了一个将多通道表面肌电信号与人类下肢屈曲/伸展(FE)关节角度相关的回归模型。在实验范例中,通过光学运动捕捉系统记录了人类下肢的16个外部标记的三维轨迹,并同步记录了与下肢运动直接相关的10条肌肉的表面肌电信号。利用原始数据,可以准确计算髋,膝和踝关节的关节角度,并提取表面肌电信号强度的时间序列。然后,建立了由受限玻尔兹曼机(RBM)组成的深度置信网络(DBN),以此在低维空间中对经过多通道处理的表面肌电信号进行编码,并提取出最佳特征。最后,使用反向传播(BP)神经网络将最佳表面EMG特征映射到FE关节角度。结果表明,本文提出的利用DBN方法从多通道表面肌电信号中提取的特征优于主成分分析(PCA),减少了人体行走时估计关节角与计算关节角之间的均方根误差(RMSE)。减少约50%预期该模型将开发人机交互界面,以实现连续的生物电控制并改善人机之间的运动稳定性,特别是对于下肢可穿戴智能设备。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号