On the basis of the actual steel deck structure of Taizhou Bridge, this paper carries out hot-spot stress analysis on some key spots by using the finite element model which simulates local structure of orthotropic steel bridge decks. A finite element model is established for local structure of orthotropic steel bridge decks, and in the analysis of linear elasticity of the structure, face load is employed to simulate the loads from vehicle wheels. Analysis results show that main stresses are relatively heavy at the joints between diaphragm plates, top plates and U-shaped ribs and the joints between diaphragm plates and U-shaped ribs. These joints shall be regarded as key points for hot-spot stress analysis. Different mesh densities are adopted in the finite element model and the main stresses at different hot spots are contrasted and linear extrapolation is carried out using extrapolation formulae. Results show that different mesh densities have different influences on the hot-spot stresses at the welded seams of U-shaped ribs. These influences shall be considered in calculation and analysis.
展开▼