首页> 外文会议>International Conference on Control, Automation, Robotics Vision >Stabilizing Passive Dynamic Walk by Constraining Leg Angles by Foot Shape
【24h】

Stabilizing Passive Dynamic Walk by Constraining Leg Angles by Foot Shape

机译:通过脚形状限制腿角稳定被动动态步行

获取原文

摘要

This paper proposes a foot shape design to enhance stability of passive dynamic walk, by constraining fall down phenomenon in both sagittal and lateral planes. We focus on the over swinging situation for a passive dynamic biped walker, where exceeding sideway and forward swing of a leg causes fall down phenomenon. From geometrical analysis, we found that stability under a wide range of slope inclinations will be achieved by limiting swing legs spatially in a certain angle. We also found that the limiting leg's angles are achieved by a certain type of a 3D sole shape, which provides stability in a compact size. In lateral plane, limiting swing from side to side is effective to avoid falling down in this plane. This is realized by preparing limiter shape in lateral direction, such as two separate sub-foots placed apart in parallel. In sagittal plane, stability of walk is kept by constraining fall down phenomenon toward moving direction, by a sharp edge at the head of a foot. A prototype of a foot that realizes these two constraining effects in a 3D sole shape design is proposed. We show that the constraining effect by the proposed foot shape is effective for a walk comparing to an arctic foot shape.
机译:本文提出了一种脚形设计,以提高被动动态步行的稳定性,通过在矢状和横向平面中约束下降现象。我们专注于对被动动态双向助行器的过度摆动局面,超过侧向侧向的侧向和向前摆动导致落下现象。从几何分析中,我们发现,通过在空间上以一定角度限制摆动腿,可以实现在各种坡度倾斜下的稳定性。我们还发现,限制腿的角度通过某种类型的3D唯一形状实现,其在紧凑的尺寸下提供稳定性。在横向平面中,从侧面到侧的限制摆动是有效的,以避免在该平面中倒下。这是通过在横向方向上制备限制器形状来实现这一点,例如并联分开的两个单独的子脚。在矢状平面中,通过脚头的锋利边缘约束朝向移动方向的垂直现象来保持步行的稳定性。提出了一只脚的原型,实现了在3D唯一形状设计中实现这两个约束效应。我们表明,所提出的脚形状的约束效果对于与北极脚形状相比的步行是有效的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号