Modelling and Kinematic Analysis of a Built Up Linear Delta Robot

摘要

In this paper kinematic analysis of a 3-PUU translational parallel manipulator (TPM) is made by creating the forward and inverse Kinematic solutions. For a given position, control of the end effecter is then realized by using the calculated inverse kinematic parameters as reference values. For kinematic analysis relevant equations are derived from geometrical vector relations. For the forward and inverse kinematic solutions of the non-linear model a MATLAB based iterative algorithm is developed and the inverse kinematic solutions of limbs, are then used to control the end effecter position through screw rails which are driven by DC motors. After the general mechanical design of the manipulator all parts are drawn and modelled in SolidWorks, and a simulation of the motion in three dimensional space is made. To support the reliability of calculated parameters through inverse kinematic solutions, results are compared with the values of SolidWorks based simulation model of the manipulator. Furthermore a real position control with use of feed back encoders is applied and the evaluated results are compared with the results of a simulation model. Very similar and satisfactory results are obtained with both simulation and real application.