首页>外文会议>其他>International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace

International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Flammability Behavior of Composite Mixed with Retardant Agents

机译：复合材料与减速剂混合的易燃性能
- 作者：Ali I. Al-Mosawi;Mustafa Ahmed Rijab;Ali J. Salaman;Naser A. Alwash;Naglaa S. Aziz
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Araldite resin composite;
- Hybrid flame retardants;
- Thermal erosion test;
2.The Command and Control Software Implementation of a CCD Video 2 Axis Gyrostabilized Payload Used by a Fixed Wing UAV Configuration Platform

机译：CCD视频2轴Gyrostabilized有效载荷的命令和控制软件实现由固定翼UAV配置平台使用
- 作者：Corneliu Axente;Liviu Cosereanu;Daniel-IoanSuteu
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- CCD payload;
- MEMS;
- UAV;
3.Multi-Agent Robotic System - Robotic Soccer in Category Mirosot

机译：多功能机器人系统 - 在Mirosot类别中的机器人足球
- 作者：Mikulas Hajduk;Marek Sukop
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Robot soccer;
- Mobile robot;
- Multi-agent;
4.Simulation on the distribution of forces under the UAV's specific profiles

机译：关于UAV特定配置文件下力分布的模拟
- 作者：Florescu Daniela;Florescu Iulian
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- UAV;
- Static pressure;
- Coanda effect;
- Fluent 6.3;
5.Device Used for Magnetic Treatment of Fuel Fluids Before Burner

机译：用于燃烧器前燃料流体磁化的装置
- 作者：Robert Ciobanu;Maurizio Repetto;Octavian Dontu;Fabio Freschi;Tudor Prisecaru
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Magnetic circuits;
- Fuel fluids;
- Magnetic treatment;
- Burning tests;
6.Remote Control Testing Consumer Products for Durability and Performance

机译：遥控测试消费产品的耐用性和性能
- 作者：CUTA Andrei Nicolae;TRUFASU Aurelian Ovidius
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Ethernet;
- Microcontroller;
- Web Interface;
- Browser;
- Testing;
7.Modelling and Kinematic Analysis of a Built Up Linear Delta Robot

机译：建模和运动学分析建立的线性三角机器人
- 作者：Erol Uyar;Lutfi Mutlu
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Kinematic;
- Parallel manipulator;
- Control;
- Transfer function;
- Simulation;
8.Evaluation Flame Retardancy of Epoxy Composite by Using Design of Experiments

机译：使用实验设计评价环氧复合材料的阻燃性
- 作者：ALI I. Al-Mosawi;Jaheel K. Ahmed;Haydar A. Hussain
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Flammability;
- Epoxy composite;
- Design of experiments;
- Noise variables;
9.A 6-DoF Satellite Virtual Simulator Design and Development

机译：6 DOF卫星虚拟模拟器设计和开发
- 作者：Mehran Mirshams;Ali Nahvi;Mohsen Khosrojerdi;Hojat Tae;Ali Vahid
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Virtual environment;
- Satellite simulator;
- Mission simulation;
- Data transferring;
- Attitude and orbit control system;
10.Infrared Detection for Surveillance System

机译：监控系统的红外检测
- 作者：RIZESCU Ciprian Ion;VLAD Bogdan Robert;RIZESCU Dana
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Infrared surveillance system;
- Infrared detection;
- Sensors;
11.Mathematical Simulation of Leg's a 5-Dof a Biped Robot

机译：腿部5-DOF A Biped机器人的数学仿真
- 作者：Mate Csaba Zoltan;Faluvegi Erzsebet;Cristea Luciana
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Mechatronics;
- Stability;
- Biped robot;
- Kinematics;
- Simulation;
12.Mechatronic Designed Hydraulic Positioning System

机译：机电调整设计的液压定位系统
- 作者：Mihai Avram;Despina Duminica;Viorel Gheorghe;Constantin Bucsan
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Hydraulic positioning system;
- Software compensation;
- Control algorithm;
13.Miniature Flexible Pneumatic Actuator

机译：微型柔性气动执行器
- 作者：Ionescu Mircea;Rosca Ileana-Constanta;Braun Barbu
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Actuator;
- Miniature;
- Pneumatic;
- Elastic material;
- Deformation;
14.Eye Tracking Used to Evaluate the Human Behavior

机译：眼镜用于评估人类行为
- 作者：BARITZ Mihaela Ioana;COTOROS Diana;BRAUN Barbu
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Eye;
- Movements;
- Vision;
- Gaze direction;
15.Possibilities of Use of Virtual Reality in the Field of Manufacturing Systems

机译：在制造系统领域使用虚拟现实的可能性
- 作者：Lucia Pachnikova;Mikulas Hajduk;Andrej Belovezcik
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Virtual reality;
- Robot;
- Model;
16.An Architecture Design of Navigation Solution Using Signal Information from Global Navigation Satellite System

机译：来自全球导航卫星系统信号信息的导航解决方案的架构设计
- 作者：Naqvi Najam Abbas;Wang Xin;An CongYi;Li Yan Jun
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Global Navigation Satellite System (GNSS);
- Navigation;
- Positioning;
- GPS;
17.VBA for Tracking Manufacturing Process in SME

机译：VBA用于跟踪中小企业制造过程
- 作者：Andreea DOBRA
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- SME;
- Tools;
- Manufacture;
- Warehouse;
18.Torsor Evaluation of the Tooth During the Milling Process

机译：铣削过程中牙齿的扭转评估
- 作者：Bisu Claudiu;Olteanu Elena Luminita;Minciu Constantin;Zapciu Miron
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Milling;
- Tool position;
- Torsor;
- Dynamometer;
19.Research on Correlation Between Any Plantar Diseases and Stability

机译：任何跖疾病与稳定性相关性的研究
- 作者：BRAUN Barbu Cristian;BARITZ Mihaela Ioana;COTOROS Diana
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Plantar;
- Pressure;
- Stability;
- Subjects;
- Center of mass;
- Diseases;
- Evaluation;
20.Analytical Calculation of the Position Loop Gain for Linear Motor CNC Machine Tool

机译：线性电机CNC机床定位环增益的分析计算
- 作者：Zoran Pandilov;Vladimir Dukovski
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Analytical calculation;
- CNC machine tool;
- Linear motor;
- Servo drive;
- Position loop gain;
21.Measuring the Flanks of a Bevel Gear Made by Heidenreich-Harbeck Cutting Machine

机译：测量Heidenreich-Harbeck切割机制造的锥齿轮的侧面
- 作者：Erzsebet Faluvegi;Csaba Zoltan Mate;Luciana Cristea
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Bevel gear;
- Ocotid II teething;
- Coordinate measuring machine;
- Probe compensation;
22.Thermal Shock in Sprayed Layers Observed using Infrared Thermography

机译：使用红外热成像观察喷涂层的热冲击
- 作者：Dina Viorel-Cristian;Dumitru Gabriel Marius;Dumitru Bogdan;Dumitrascu Constantin;Dand Botez Sorin Constantin
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Infrared thermography;
- Metal spraying;
- Reconditioning;
- Non-destructive testing (NDT);
23.Effect of Dry Binders on Mechanical Properties of Ketoprofen-Cyclodextrin Extended Drug Release Systems

机译：干粘合剂对酮洛芬 - 环糊精延长药物释放系统力学性能的影响
- 作者：Monica Stamate Cretan;Carmen Gafitanu;Ciprian Stamate;Eliza Gafitanu
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Mechanical strength;
- Hardness;
- Friability;
- Extended drug release;
- Ketoprofen;
24.A Pneumatically Driven Stewart Platform Used as Fault Detection Device

机译：用于故障检测设备的气动驱动的斯图尔特平台
- 作者：Martin Ramsauer;Michael Kastner;Paolo Ferrara;Ronald Naderer;Hubert Gattringer
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Stewart Platform;
- Hexapod;
- Fault Detection;
- Pneumatic Artificial Muscle;
- Robotics;
- Control;
- Simulation;
- Equation of Motion;
25.Adaptive Drive of Manipulator Module

机译：操纵器模块的自适应驱动器
- 作者：K. S. Ivanov;G. K. Balbayev
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Adaptive drive;
- Gear;
- Variator;
26.Dynamic Force-Position Control Of The Walking Robots Motion On Slope

机译：行走机器人运动的动态力定位控制斜率
- 作者：Luige VLADAREANU;Daniel Octavian MELINTE
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Robot real-time control;
- Walking robot stability;
- Hybrid position-force control;
- Multimicroprocessor system;
27.Ultrasound Examination - Mean of Analysis of the Layers Properties Deposited Through Different Thermal Spraying Methods

机译：超声检查 - 通过不同热喷涂方法沉积的层性能分析的平均值
- 作者：Botez Sorin-Constantin;Dumitru Gabriel Marius;Dumitru Bogdan;Dina Viorel-Cristian
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Metallization;
- Ultrasound;
- Adherence;
- Defectoscopy;
28.Theoretical and Experimental Contact Stiffness Characterisation of Nominally Flat Surfaces

机译：名义上平坦表面的理论和实验接触刚度表征
- 作者：Iuliana Piscan;Agusmian P. Ompusunggu;Thierry Janssens;Nicolae Predincea
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Tangential contact stiffness;
- Rough surfaces;
- Weibull distribution;
- Elastic contact;
29.About The Study of Bending Beam on Elastic Environment by Transfer-Matrix Method

机译：关于通过转移矩阵法研究弹性环境的研究
- 作者：SUCIU Mihaela
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Density function;
- Density of charge;
- State vector;
- Transfer-Matrix;
- Embedded beam;
- Elastic environment;
30.Establishing the State of Operation on Vibration Behavior of Industrial Robot

机译：建立工业机器人振动行为的运作状态
- 作者：Niculescu Dan;Vagas Marek;Olaru Adrian;Mikulas Hajduk;Ghionea Adrian
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Vibration;
- Fast Fourier Transform;
- Frequency;
- Preventive maintenance;
31.Design and Implementation of an Improved Real-Time Tracking System for Navigation Surgery by Fusion of Optical and Inertial Tracking Methods

机译：光学和惯性跟踪方法融合改进了导航手术的改进实时跟踪系统的设计与实现
- 作者：Ali Soroush;Farzam Farahmand;Hasan Salarieh
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Kalman filter;
- Navigation surgery;
- Inertial tracking;
- Sensor fusion;
32.Machining With Image Recognition Using Industrial Robot

机译：使用工业机器人加工图像识别
- 作者：Tadeusz Mikolajczyk;Pawel Wasiak
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Robot machining;
- Robot grinding;
- G-code;
33.Nonlinear Aeroelastic Behavior of Slender Wings Considering a Static Stall Model Based on Wagner Function

机译：基于WAGNER功能的静态停滞模型，纤细翅膀的非线性气动弹性行为
- 作者：Davood Badiei;Mohammad Homayoon Sadr;Shahrokh Shams
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Aeroelastic Behavior;
- Slender Wing;
- Static Stall Model;
- Limit Cycle Oscillations (LCOs);
34.The Preliminary Study Of Machinability During Milling Of Titanium Alloy (Ti-6Al-4V)

机译：钛合金研磨过程中的可加工性初步研究（TI-6AL-4V）
- 作者：Claudia Serboi;Stefan Velicu;Philippe Darnis;Raynald Laheurte;Cristian Ionescu
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Titanium alloys;
- Machinability;
- Cutting forces;
- Machining parameters;
35.Functional and Constructive Optimization of a Serial-Modular Industrial Robot Implemented within a Single Purpose Flexible Manufacturing Cell

机译：单一用途柔性制造电池内实现的串模工业机器人的功能和建设优化
- 作者：Petrisor Silviu Mihai;Barsan Ghita
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Dynamic Modeling;
- Optimization;
- Implementation;
- Design;
- Flexibility;
36.Development and optimization of perimeter traversing robot

机译：遍历机器人的外围的开发与优化
- 作者：Sudeshna Mohanty;Subhrasmita Mahapatra;Sanat Ku. Panda;Plavan Ku. Rath;Manoj Ku. Sarangi;Olga I. Bylya
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Robot;
- Perimeter tracing;
- Edge detection;
- Optimization;
37.Spherical Ultrasonic Motor for Pipe Inspection Robot

机译：管道检查机器人的球形超声波电机
- 作者：Shigeki Toyama
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Ultrasonic motor;
- Inspection robot;
- Camera actuator;
- Controller;
- Sensing system;
38.Optimizing the Global Dynamic Compliance by Using the Smart Damper and LabVIEW Instrumentation

机译：通过使用智能阻尼器和LabVIEW仪器优化全局动态合规性
- 作者：Adrian Olaru;Serban Olaru;Dan Paune
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
39.Optimal Design of the Mechanical Device for a Photovoltaic Tracking Mechanism

机译：光伏跟踪机构机械装置的最优设计
- 作者：Monica Alina Ionita;Catalin Alexandru
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Photovoltaic module;
- Tracking mechanism;
- Virtual prototype;
- Optimization;
40.Dynamic Thermal Analysis of Laminated Cylinder with a Piezoelectric Layer Based on Three-Dimensional Elasticity Solution

机译：基于三维弹性溶液的压电层叠层圆柱体的动态热分析
- 作者：A. R. Daneshmehr;S. Akbari;A. Nateghi
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Piezoelectric;
- Thermal;
- Actuator;
- Elasticity;
- Cylinder;
41.Advanced Rehabilitation Technology

机译：高级康复技术
- 作者：Ileana Ciobanu;Mihai Berteanu
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Rehabilitation robotics;
- Assistive technology;
- Advanced rehabilitation technology;
42.Three-Dimensional Elasticity Study of Vibration of a Composite Shell Panel with Embedded Piezoelectric Sensors

机译：嵌入式压电传感器复合壳板振动的三维弹性研究
- 作者：Alireza Daneshmehr;Samaun Nili;Alireza Nateghi;Shirjan Hussaini
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Three dimensional elasticity;
- Piezoelectric;
- Multi-layered composite;
- Shell panel;
- Vibration;
43.Experimental Study of Vortex Shedding Control Using Plasma Actuator

机译：等离子体执行器涡旋脱落控制的实验研究
- 作者：Masoud Mirzaei;A. Shams Taleghani;A. Shadaram
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Plasma actuator;
- Dielectric barrier discharge;
- Active control;
- Vortex Shedding;
- Airfoil;
44.Validation of the Mathematical and Numerical Models for Artillery Barrels Autofrettage Based on Hydrostatic Procedure

机译：基于静水压过程的炮兵自动调整数学和数值模型的验证
- 作者：Barsan Ghita;Petrisor Silviu Mihai;Giurgiu Luminita
- 会议名称：《International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace》 | 2012年
- Plastic Flow Theory;
- Artillery Barrels;
- Pressure;
- Autofrettage;
- Residual Stresses;