In-situ boron-doped low-stress LPCVD polysilicon for micromechanical disk resonator

摘要

Polycrystalline silicon (polysilicon) has been used as an important structural material for microelectromechnical systems (MEMS) because of its compatibility with standard integrated circuit (IC) processes. As the structural layer of micromechanical high resonance frequency (high-f) and high quality factor (high-Q) disk resonators, the low residual stress and low resistivity are desired for the polysilicon thin films. In the present work, we investigate the effect of deposition and annealing conditions on the residual stress and resistivity for in-situ deposited low pressure chemical vapor deposition (LPCVD) polysilicon films. Low residual stress (−100 MPa) was achieved in in-situ boron-doped polysilicon films deposited at 570°C and annealed at 1000°C for 4 hr. The as-deposited amorphous polysilicon films were crystallized by the rapid thermal annealing and have the (111)-preferred orientation, the low tensile residual stress is expected for this annealed film, the detailed description on this work will be reported soon. The controllable residual stress and resistivity make these films suitable for high-Q and high-f micro- mechanical disk resonators.