首页> 外文会议>Electronics Packaging Technology Conference, 2009. EPTC '09 >Cross-interaction effect in the Ni/Sn/Cu solder joints
【24h】

Cross-interaction effect in the Ni/Sn/Cu solder joints

机译:Ni / Sn / Cu焊点中的交互作用

获取原文

摘要

The mutual interaction between Sn/Ni and Sn/Cu interfacial reactions in a Ni/Sn/Cu sandwich solder joint structure has been discussed in this present work. The major interfacial reaction product on the Sn/Cu interface was Cu6Sn5 phase, while on the Sn/Ni interface, a ternary (Cu,Ni)6Sn5 compound layer was formed, instead of the typical Ni-Sn compound phase. On the other hand, an asymmetrical solder microstructure was observed in the Ni/Sn/Cu solder joint. The asymmetrical solder microstructure resulted from the Cu concentration gradient along the Ni/Sn/Cu solder joint. Mechanical tensile tests showed that the mechanical property of the Ni/Sn/Cu solder joint is highly correlated with the asymmetrical solder microstructure.
机译:Ni / Sn / Cu夹层焊点结构中的Sn / Ni和Sn / Cu界面反应之间的相互作用已经在本工作中进行了讨论。 Sn / Cu界面上的主要界面反应产物是Cu 6 Sn 5 相,而在Sn / Ni界面上,三元(Cu,Ni)形成了6 Sn 5 化合物层,代替了典型的Ni-Sn化合物相。另一方面,在Ni / Sn / Cu焊点中观察到不对称的焊料微观结构。不对称的焊料微观结构是由沿着Ni / Sn / Cu焊料接头的Cu浓度梯度引起的。机械拉伸试验表明,Ni / Sn / Cu焊点的机械性能与不对称焊料的微观结构高度相关。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号