Etude par émission acoustique de la plasticité et de l'endommagement de l'aluminium en fatigue oligocyclique

摘要

An analysis of microstructural processes taking place during low-cycle fatigue of pure aluminum is performed by the Acoustic Emission technique (AE) with its two types: continuous and discrete. The main interest of this technique is that it enables the following of the dynamic evolution of the microstructure during the fatigue test. We distinguished five fatigue stages: primary hardening, primary softening, secondary hardening, secondary softening and failure. The various stages of the material’s macroscopic behavior during cyclic loading are clearly differentiated by the acoustic activity. During the first three stages, mainly microstructural phenomena related to plasticity of material are taking place, whereas damage (micro and macro-cracking) dominate the last two stages. The continuous AE results from the cumulative effect of many uncorrelated dislocations’ movements of low amplitude. This continuous plasticity decreases during the 1st stage but reproduces the evolution of the macroscopic behavior of the sample during following stages. This behavior is related to the dislocation structure established during the various fatigue stages. On the other hand, the discrete AE recorded at the time of the first three stages is associated to another type of plasticity: intermittent plasticity. This plasticity is associated to co-operative dislocation movements of great amplitude; dislocation avalanches. These dislocation avalanches generate acoustic signals power law distributed in amplitude and energies. Intermittent plasticity is then scale invariant while continuous plasticity is associated to dislocation movements with a characteristic size. We highlight for the first time the coexistence of these two types of plasticity in FCC materials, which are therefore not incompatible. During the last two stages of fatigue, the recorded acoustic signals are categorized in two groups: the first one is characterized by scale invariance whereas the other is associated to a characteristic size. The first category comprises independent acoustic signals, appearing randomly during cycles. These signals are generated by micro-cracking events within the volume of the sample (nucleation, percolation…). The second group contains acoustic signals generated almost at the same stress level during several successive cycles and having a nearly identical acoustic signature. We name these signals multiplets in reference to seismology. We put forth the hypothesis that such AE multiplets are the signature of fatigue crack propagation, one cycle after the other, whose trace can be observed post-mortem with fatigue striations on fracture surface, or a signature of frictions between the asperities present on both sides of the crack.