首页> 外文OA文献 >Electron irradiation test facility for irradiation of structural materials in conditions of molten salt reactor
【2h】

Electron irradiation test facility for irradiation of structural materials in conditions of molten salt reactor

机译:用于在熔融盐反应堆条件下辐照结构材料的电子辐照测试设备

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

A new device, Electron Irradiation Test Facility (EITF), has been created at electron linear accelerator Linac-10 at Accelerator R&D Complex affiliated with NSC KIPT. This facility allows to carry on studies on corrosion resistance of differently shaped samples of the Hastelloy type alloys in the melt of zirconium and sodium fluoride salts at high temperature. A container assembly (CA) that held samples was irradiated for 700 hours in the radiation field of electron beam with the energy ∼10 MeV and average current ∼500 microAmps (power∼5 kW ). The CA consisting of 16 containers (made of a carbon-carbon composite) that were loaded with research samples of Hastelloy alloys in the melt of the salts ZrF₄ и NaF was placed in air-tight protective shell made of stainless steel. During the irradiation, the CA was placed in argon atmosphere. The CA temperature was monitored with three thermocouples. Over the entire length of the irradiation process the stationary temperature regime was provided: 650°С ± 15°С.
机译:在NSC KIPT所属的Accelerator R&D Complex的电子线性加速器Linac-10上创建了一种新的设备,即电子辐照测试设施(EITF)。该设备可以在高温下对锆和氟化钠盐熔体中不同形状的哈氏合金合金样品的耐腐蚀性进行研究。装有样品的容器组件(CA)在电子束的辐射场中被照射700小时,能量约为10 MeV,平均电流约为500 microAmps(功率约5 kW)。将由16个容器(由碳-碳复合材料制成)组成的CA装满在盐ZrF the NaF熔体中的哈氏合金合金研究样品,并将其放置在不锈钢制成的气密性保护壳中。在照射期间,将CA置于氩气氛中。用三个热电偶监测CA温度。在整个辐照过程中,提供了固定温度范围:650°С±15°С。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号