Longwall Shield Recovery Using Mobile Roof Supports

摘要

Longwall mining has gained the reputation as being the safest extraction method in underground coal mines. However, one of the most difficult tasks associated with longwall mining is moving the face once a panel is completed. Based on Mine Safety and Health Administration (MSHA) fatality reports since 1996, longwall face recovery operations have claimed the lives of 5 U.S. miners and have resulted in numerous injuries. Recovery operations can be hazardous because they involve moving large pieces of equipment in very confined spaces. They are also conducted in highly stressed ground conditions due to front abutment loads generated by panel extraction. Shield removal is the most hazardous operation during face recovery because miners are constantly exposed to the unpredictable gob edge. To protect the miners, one or more walking shields, cribbing and/or other supplemental roof and standing supports are typically employed as breaker line supports as each shield is removed. At the Harris No. 1 Mine in southern WV, mobile roof supports (MRSs) have been used in lieu of traditional walking shields on 17 face moves since 1997. MRSs are shield-like support units mounted on crawler tracks and are commonly used during roomand- pillar retreat mining operations. For longwall recovery, the two biggest advantages that MRSs have over traditional walking shields are that they are remotely controlled and are highly maneuverable. MRSs have contributed to safer shield recovery and shorter move times at the Harris No. 1 Mine. This paper will address both the safety and the operational issues associated with MRS usage during shield recovery. It will also discuss new developments, including the use of the inherently safer battery powered MRSs, which have been recently certified by the Mine Safety and Health Administration.