INSTRUMENT CALIBRATION PROCEDURE MANUAL AUTOMATIC FLIGHT CONTROL ANALYZER AN/ASM-103 PART NO. 421830-01-01

摘要

This summary contains all WARNINGS and CAUTIONS used in this procedure and the corresponding page numbers. All personnel concerned with calibrating, operating, or maintaining the equipment must fully understand the hazards and must be familiar with approved safety precautions and procedures. Before proceeding, post an ap¬propriate "DANGER" sign at the work stations and ensure that another person is in the area and aware of the work in progress.nWARNING - A pressure relief valve is located on side of the Test Instrument case. Always depress the pressure relief valve prior to opening cover. This operation is necessary to equalize the pressure inside the Test Instrument with the pressure out¬sidenWARNING - Be sure SYSTEM POWER switch is in the OFF positionnWARNING - The Test Instrument uses 128 volts. Do not make contact with exposed wires or connections.nCAUTION - Be careful not to kink or damage inter¬connecting cables when removing panel assemblies.