EXPERIENCE WITH A THREE-AXIS SIDE-LOCATED CONTROLLER DURING A STATIC AND CENTRIFUGE SIMULATION OF THE PILOTED LAUNCH OF A MANNED MULTISTAGE VEHICLE

摘要

An investigation was conducted to determine a human pilot's ability to control a multistage vehicle through the launch trajectory. The simulation was performed statically and dynamically by utilizing a human centrifuge. An interesting byproduct of the program was the three-axis side-located controller incorporated for pilot control inputs. This method of control proved to be acceptable for the successful completion of the tracking task during the simulation.nThere was no apparent effect of acceleration on the mechanical operation of the controller, but the pilot's control feel deteriorated as his dexterity decreased at high levels of acceleration.nThe application of control in a specific control mode was not dif¬ficult. However, coordination of more than one mode was difficult, and, in many instances, resulted in inadvertent control inputs. The accept¬able control harmony at an acceleration level of 1 g became unacceptable at higher acceleration levels. Proper control-force harmony for a particular control task appears to be more critical for a three-axis controller than for conventional controllers. During simulations in which the pilot wore a pressure suit, the nature of the suit gloves further aggravated this condition.