Fabrication and evaluation of silica-based optical fiber probes by chemical etching method

摘要

A sensor probe with a microstructure, which is used for near-field scanning optical microscopes, plays an important role in the resolution and detection sensitivity of the microscope system. In this study, we devised a system for sharpening optical fibers. by which we could fabricate tapered tips of silica-based optical fibers reproducibly in a desired shape by controlling the solution temperature, etching time, and etching depth when applying chemical etching techniques using hydrofluoric acid. Furthermore, we evaluated the diameter of the core tip of an optical fiber by measuring the near-field pattern and comparing it with the Gaussian beam pattern of a non-edge-etched optical fiber. A strong correlation between the ratio of the 1/e(2)-value width of the beam profile of the near-field pattern to that of the Gaussian beam and the diameter of the extreme tip of the core became apparent. (c) 2005 The Optical Society of Japan.