...
首页> 外文期刊>International Journal of Multiphase Flow >Infiltration of liquid droplets into porous media: Effects of dynamic contact angle and contact angle hysteresis
【24h】

Infiltration of liquid droplets into porous media: Effects of dynamic contact angle and contact angle hysteresis

机译:液滴渗透到多孔介质中:动态接触角和接触角滞后的影响

获取原文
获取原文并翻译 | 示例
           

摘要

We present a detailed theory for infiltration, which accounts for a general model for the dynamic contact angle between the droplet and the porous medium as well as contact angle hysteresis, and analyze the resulting equations of motion. The theory shows that infiltration of droplets into dry porous media involves three phases due to contact angle hysteresis: (1) An increasing drawing area (IDA) phase during which the interface between the droplet and the porous medium increases, (2) a constant drawing area (CDA) phase during which the contact line of the droplet remains pinned, and (3) a decreasing drawing area (DDA) phase. The theory is based on the following assumptions: (1) The droplet has the shape of a spherical cap, (2) the porous medium consists of a bundle of vertical tubes of same size, and (3) the pressure within the droplet is uniform. We find that infiltration always consists of a cascade process formed by the IDA, CDA, and DDA phases, where the entire process may begin or end in any of the three phases. The entire process is formulated with four nondimensional parameters: Three contact angles (initial, advancing, and receding) and a porous permeability parameter. A comparison of our theory to experimental data suggests that one should use different parameterizations for the dynamic contact angle models of the IDA and DDA phases. In general, the IDA and DDA phases are described by integro-differential equations. A numerical-solution approach is presented for solving the dynamic equations for infiltration. The total time of infiltration and the time dependence of drawing area are critically affected by the occurrence of the IDA, CDA, and DDA phases as well as by the permeability. With ordinary differential equations (ODEs), we are able to approximate the IDA phase and to describe exactly infiltration processes that start out with the CDA or DDA phase. (C) 2008 Elsevier Ltd. All rights reserved.
机译:我们提出了一个详细的渗透理论,该理论解释了液滴与多孔介质之间的动态接触角以及接触角滞后的通用模型,并分析了所产生的运动方程。该理论表明,由于接触角滞后,液滴渗透到干燥的多孔介质中涉及三个阶段:(1)增大的拉伸面积(IDA)相,在此期间液滴与多孔介质之间的界面增加,(2)恒定的拉伸区域(CDA)相,在此期间液滴的接触线保持固定,以及(3)减小绘图区(DDA)相。该理论基于以下假设:(1)液滴具有球形帽的形状,(2)多孔介质由一束相同大小的垂直管组成,并且(3)液滴内的压力均匀。我们发现渗透总是由IDA,CDA和DDA阶段形成的级联过程组成,其中整个过程可能在三个阶段中的任何一个阶段开始或结束。整个过程由四个无量纲参数组成:三个接触角(初始,前进和后退)和多孔渗透率参数。将我们的理论与实验数据进行比较表明,对于IDA和DDA相的动态接触角模型,应该使用不同的参数设置。通常,IDA和DDA相用整数微分方程描述。提出了一种数值求解方法来求解渗透动力学方程。渗透的总时间和绘制区域的时间依赖性受IDA,CDA和DDA相以及渗透率的影响很大。使用常微分方程(ODE),我们能够近似IDA相并准确描述以CDA或DDA相开始的渗透过程。 (C)2008 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号