首页> 外文期刊>International Journal of Control >Robust tracking control for a class of electrically driven flexible-joint robots without velocity measurements
【24h】

Robust tracking control for a class of electrically driven flexible-joint robots without velocity measurements

机译:一类无需速度测量的电动柔性关节机器人的鲁棒跟踪控制

获取原文
获取原文并翻译 | 示例
       

摘要

This article addresses the motion tracking control for a class of flexible-joint robotic manipulators actuated by brushed direct current motors. This class of electrically driven flexible-joint robots is perturbed by time-varying parametric uncertainties and external disturbances. A novel observer-based robust dynamic feedback tracking controller without velocity measurements will be developed such that the resulting closed-loop system is locally stable, all the states and signals are bounded and the trajectory tracking errors can be made as small as possible. Only the measurements of link position and armature current are required for feedback and so the number of sensors in the practical implementation of the developed control scheme can be greatly reduced. The observer structure is of reduced order in the sense that the observer is constructed only to estimate the velocity signals and whose dimension is half of the dimension of flexible-joint robots. Especially, for the set-point regulation problem, the developed controller is simplified to a linear time-invariant controller. Consequently, the robust tracking control scheme developed in this study can be extended to handle a broader class of uncertain electrically driven flexible-joint robots and the developed robust control schemes possess the properties of computational simplicity and easy implementation. Finally, simulation results are presented to demonstrate the effectiveness of the proposed control algorithms.
机译:本文介绍了由有刷直流电动机驱动的一类柔性关节机器人操纵器的运动跟踪控制。这类电动柔性关节机器人会受到时变参数不确定性和外部干扰的干扰。将开发一种新颖的基于观测器的鲁棒动态反馈跟踪控制器,该控制器无需进行速度测量,从而使所得的闭环系统局部稳定,所有状态和信号都受到限制,并且可以使轨迹跟踪误差尽可能小。反馈仅需要测量连杆位置和电枢电流,因此在实际实施已开发的控制方案时,可以大大减少传感器的数量。从某种意义上说,观察器结构的顺序是减少的,因为观察器仅构造为估计速度信号,并且其尺寸是柔性关节机器人尺寸的一半。特别是对于设定点调节问题,将开发的控制器简化为线性时不变控制器。因此,在本研究中开发的鲁棒跟踪控制方案可以扩展为处理更多种类的不确定的电动柔性关节机器人,并且所开发的鲁棒控制方案具有计算简单和易于实现的特性。最后,仿真结果表明了所提出的控制算法的有效性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号