...
首页> 外文期刊>Journal of Food Measurement and Characterization >The rheological behaviors and morphological characteristics of different food hydrocolloids ground to sub-micro particles: in terms of temperature and particle size
【24h】

The rheological behaviors and morphological characteristics of different food hydrocolloids ground to sub-micro particles: in terms of temperature and particle size

机译:不同食物水胶体接地对亚微粒的流变行为及形态特征:在温度和粒度方面

获取原文
获取原文并翻译 | 示例

摘要

Temperature sweep tests and steady shear properties of five different food hydrocolloids (guar gum, xanthan gum, carboxymethylcellulose, pectin and carrageenan) in two different particle sizes groups have been determined at 25, 40, 60 and 80 degrees C in 1% aqueous solution. Also, the Scanning Electron Microscopy (SEM) images of gums were taken to investigate the morphological properties of the samples. The particle size and processing temperature significantly affected all rheological parameters of the hydrocolloid solutions. The flow behavior of the samples was fitted to Ostwald de Waele model (R-2 = 0.959). The highest n value was recorded at 60 degrees C for all samples. The most drastic changes in consistency coefficient (K) values of the samples were observed in carrageenan solution and it was ranged from 0.013 to 1.774 Pa.s(n) before the size reduction and from 0.007 to 0.337 Pa.s(n) after the size reduction process. As the consistency coefficient (K) and apparent viscosity (eta(50)) decreased with the temperature, the flow behavior index increased in both group of samples. As a result, it was concluded that the increase in processing temperature and size reduction process caused a decrease in resistance of hydrocolloid solutions subjected to the deformation, which is a very important factor affecting the quality and good mouth-feel of products.
机译:在1%水溶液中的25,40,60和80℃下测定,在两种不同粒度组中的温度扫描试验和五种不同食物水胶体(瓜尔胶,黄原胶,羧甲基纤维素,果胶和角叉菜胶)的稳定剪切性能。此外,考虑胶的扫描电子显微镜(SEM)图像来研究样品的形态学性质。粒径和加工温度显着影响水胶体溶液的所有流变参数。样品的流动性能适用于OSTWALD DE WAELE模型(R-2 = 0.959)。对于所有样本,以60度C记录最高的N值。在角叉菜胶溶液中观察到样品的一致性系数(k)值的最激烈变化,在尺寸减少和0.007至0.337 PA.S(n)之前,它的范围为0.013至1.774Pa.s(n)。尺寸减少过程。随着稠度系数(k)和表观粘度(eta(50))随温度降低,两组样品中的流动性指数增加。结果,得出结论是,加工温度和尺寸减少过程的增加导致水胶体溶液对变形的抗性降低,这是影响产品质量和良好口感的重要因素。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号