首页> 外文期刊>Progress in Organic Coatings: An International Review Journal >Electrochemical characterization of plasma coatings on printed circuit boards
【24h】

Electrochemical characterization of plasma coatings on printed circuit boards

机译:印刷电路板上等离子体涂层的电化学表征

获取原文
获取原文并翻译 | 示例
           

摘要

Printed Circuit Boards (PCB) are the backbone of electronic devices and communication technology. The corrosion of copper tracks in PCBs is the main reliability issue in case of exposure to humidity. To overcome this, several surface finishing methods have been introduced in the industry such as plasma coatings. In this study, several electrochemical characterisation methods are explored on blank and plasma-coated PCBs to identify reliable measurement techniques and to get insight in the protective properties of the coatings on an overall macroscopic visual scale, a dedicated surface-average scale, as well as on a localised microscopic scale. The macroscopic visual corrosion behaviour was evaluated by standard salt-spray exposure tests. Odd Random Phase multisine Electrochemical Impedance Spectroscopy (ORP-EIS) provided insight into the average barrier properties of the coatings. Scanning Vibrating Electrode Technique (SVET) and Scanning Kelvin Probe Force Microscopy (SKPFM) were used to evaluate the samples' reactivity on a local scale. Scanning Electron Microscopy-Energy Dispersive X-ray (SEM-EDX) analysis was used as a complementary surface analysis method to characterise the coatings. Blank PCBs were studied as reference substrates, and their behaviour was compared to three plasma-coated PCB variants, based on fluorinated organic precursor chemistry. The salt-spray tests illustrated the protective behaviour of the coatings but did not allow to differentiate between the different coatings. With ORP-EIS, it was observed that the coatings act as a barrier against the electrolyte. This is confirmed on the local scale, where no activities were seen on the surface of the coated samples using SVET, except after 10 days of immersion when single layer plasma coatings showed higher activities. SKPFM revealed much higher surface potentials for the coated PCBs compared to the blank PCB allowing to differentiate between the various coated samples.
机译:印刷电路板(PCB)是电子设备和通信技术的骨干。在暴露于湿度的情况下,PCB中的铜轨道的腐蚀是主要的可靠性问题。为了克服这一点,在等离子体涂层等行业中引入了几种表面整理方法。在该研究中,在坯料和等离子体涂覆的PCB上探索了几种电化学表征方法,以鉴定可靠的测量技术,并在整体宏观视觉尺度上获得涂层的保护性能,专用的表面平均尺度以及在局部微观规模上。通过标准盐雾曝光测试评估宏观视觉腐蚀行为。奇数随机相多管电化学阻抗光谱(ORP-EIS)提供了对涂层的平均屏障性质的洞察。扫描振动电极技术(SVET)和扫描kelvin探针力显微镜(SKPFM)用于评估当地规模的样品的反应性。扫描电子显微镜 - 能量分散X射线(SEM-EDX)分析用作涂层表征涂层的互补表面分析方法。将空白PCB作为参考衬底进行研究,并将其行为与三种等离子体涂覆的PCB变体进行比较,基于氟化有机前体化学。盐雾试验说明了涂层的保护性行为,但不允许区分不同的涂层。使用ORP-EIS,观察到涂层作为抵抗电解质的屏障。这在局部规模上确认,如果单层等离子体涂层显示出更高的活性,则使用SVET在涂覆的样品的表面上没有看到涂覆样品表面的任何活动。 SKPFM与允许在各种涂覆的样品之间区分的空白PCB相比,涂覆的PCB的表面电位揭示了更高的表面电位。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号