首页> 外文期刊>Langmuir: The ACS Journal of Surfaces and Colloids >Pickering emulsions stabilized by soft microgels: Influence of the emulsification process on particle interfacial organization and emulsion properties
【24h】

Pickering emulsions stabilized by soft microgels: Influence of the emulsification process on particle interfacial organization and emulsion properties

机译:由软微凝胶稳定的Pickering乳液:乳化过程对颗粒界面组织和乳液性能的影响

获取原文
获取原文并翻译 | 示例
           

摘要

This work reports a new evidence of the versatility of soft responsive microgels as stabilizers for Pickering emulsions. The organization of microgels at the oil-water interface is a function of the preparation pathway. The present results show that emulsification energy can be used as a trigger to modify microgel deformation at the oil-water interface and their packing density: high shear rates bring strong flattening of the microgels, whereas low shear rates lead to dense monolayers, where the microgels are laterally compressed. As a consequence, the resulting emulsions have opposite behavior in terms of flocculation, which arises from bridging between neighboring drops and is strongly dependent on their surface coverage. This strategy can be applied to any microgel which can sufficiently adsorb at low shear rates, i.e. small microgels or lightly cross-linked ones. The control of the organization of microgels at the interface does not only modify emulsion end-use properties but also constitutes a new tool for the development of Janus-type microgels, obtained by chemical modification of the adsorbed microgels.
机译:这项工作报告了软响应微凝胶作为Pickering乳液稳定剂的多功能性的新证据。油-水界面处的微凝胶组织是制备途径的函数。目前的结果表明,乳化能可作为触发剂来改变油水界面处的微凝胶变形及其堆积密度:高剪切速率使微凝胶具有很强的扁平性,而低剪切速率会导致致密的单分子层,其中微凝胶被横向压缩。结果,所得乳液在絮凝方面具有相反的行为,这是由相邻液滴之间的桥接引起的,并且强烈依赖于它们的表面覆盖率。这种策略可以应用于任何能在低剪切速率下充分吸收的微凝胶,即小微凝胶或轻度交联的微凝胶。在界面处对微凝胶的组织的控制不仅改变了乳液的最终使用性能,而且构成了通过化学修饰吸附的微凝胶而获得的用于开发Janus型微凝胶的新工具。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号